John Harrington
Active Member
I have seen a few products and techniques to cover or delete the driver side key entry tumbler all together to help stop the vise grip tumbler rotate method of entry.
From installing sleeves over the tumbler to removing and replacing driver door handle with a passenger side handle. All can get a little pricey when involving paintwork.
I performed an extremely low cost mod by removing lock tumbler and unlock linkage, fabricating a plexiglass plug and securing it place with JB Weld and a little rattle can paint.
Looks factory and probably only cost a few dollars.
From installing sleeves over the tumbler to removing and replacing driver door handle with a passenger side handle. All can get a little pricey when involving paintwork.
I performed an extremely low cost mod by removing lock tumbler and unlock linkage, fabricating a plexiglass plug and securing it place with JB Weld and a little rattle can paint.
Looks factory and probably only cost a few dollars.
Last edited: