PJF
Full Access Member
Well it was rainy today so I thought it was a good time to install my blue LED accent lighting. I thought about buying the OEM light kit but didn't want to pay that much for accent lighting. So I did what other FRF did and ordered 5 Prewired Motorcycle LED Modules - Super Bright, Plug and Play :: Motorcycle LEDs which totalled around $20.00. At first I was going to wire them to the dimmer but had trouble finding the exact wires. Then it hit me. I could use one of my free Aux Switches. I ran a 18 gauge wire from the Aux Switch under the front drivers and passenger side then under each seat. Then I ran the wire up to the center panel that has the three switches that operate the back glass and sun roof. I took it apart and found that the flat LED fit perfect inside using the 3M tape that comes with the LED. Because of the panel being about an inch deep you can not see the LED when in the Front or back seats. It shines straight down on the center console. My Raptor has the blue accent interior. So the blue lights shining on it looked awesome. The lighting was not too bright. Just right. Here are some pics but they really dont do justice. Overall it wasnt hard at all.