Baja Designs: General Discussion Thread - GEN 2

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Baja Designs

Baja Designs

Supporting Vendor
Supporting Vendor
Joined
Apr 12, 2012
Posts
1,748
Reaction score
1,217
34955790776_2f5d05205a_b.jpg

You asked for it, so we built it! The newest addition to the RTL Series is the RTL-S (10-3004). Designed with integrated flashing amber turn signals for increased off-road safety.
We expect to begin shipping these units in early June. To pre-order, please contact us at 800-422-5292x114... Call today and order for $404.95
https://www.bajadesigns.com/Products/RTL-S-rear-light-bar.asp

-Bailey, Baja Designs
[email protected]
 

felixrc_21

Member
Joined
May 8, 2017
Posts
4
Reaction score
0
Hi... I`m new in the forum...
i want to know if there is any video of the installation of the ford raptor 30'' S8 LED light grille kit?
thanks
 
OP
OP
Baja Designs

Baja Designs

Supporting Vendor
Supporting Vendor
Joined
Apr 12, 2012
Posts
1,748
Reaction score
1,217
Hi... I`m new in the forum...
i want to know if there is any video of the installation of the ford raptor 30'' S8 LED light grille kit?
thanks

We do not have any installation videos at this time. If you have any questions please give us a call!
 

vsayler

Member
Joined
Aug 2, 2016
Posts
27
Reaction score
5
make sure you have the latest instructions and look through this thread as I think there are some pictures. The instructions have improved but still lack some detail. I think there is another thread with some useful info as well.

Great product, weak instructions, a video would be fantastic but maybe they don't sell enough raptor products to make it worth the effort.
 

gneissday

Full Access Member
Joined
Jun 30, 2016
Posts
226
Reaction score
163
S8 30" and Onx6 10" night shots

I’m following up on my earlier post indicating that I would upload some night shots of my Baja Designs S8 30” and Onx6 10” lights bars installed behind the upper and lower grills, respectively. I used my DSLR in manual mode so that all exposures are consistent and you can compare representative light output. The only thing that I forgot to put into manual mode was the white balance so there’s a little variation (in WB), even when I compared duplicate shots. But it is fair to say that the truck lights are white/blue and the BD lights are more like sunlight/daylight, which I much prefer. @BajaDesigns, good choice to go with 5K white balance!

For reference, the trees are approx 400 feet in front of me.

Photo 1: Truck low beams
Photo 2: Truck high beams
Photo 3: Onx6 10” only
Photo 4: S8 30” only
Photo 5: Onx6 and S8 only
Photo 6: Onx6, S8, high beams (everything on).

Hope this is helpful to anyone interested in adding these lights.
 

Attachments

  • DSC_7793 Small.jpg
    DSC_7793 Small.jpg
    51.6 KB · Views: 89
  • DSC_7794 Small.jpg
    DSC_7794 Small.jpg
    54 KB · Views: 99
  • DSC_7795 Small.jpg
    DSC_7795 Small.jpg
    78.1 KB · Views: 86
  • DSC_7796 Small.jpg
    DSC_7796 Small.jpg
    60.4 KB · Views: 94
  • DSC_7797 Small.jpg
    DSC_7797 Small.jpg
    66.6 KB · Views: 109
  • DSC_7798 Small.jpg
    DSC_7798 Small.jpg
    56.6 KB · Views: 85

Azholley

17 AG, 21 IS, R pending
Joined
Jan 17, 2017
Posts
1,225
Reaction score
1,040
Location
Peoria, Arizona
34955790776_2f5d05205a_b.jpg



You asked for it, so we built it! The newest addition to the RTL Series is the RTL-S (10-3004). Designed with integrated flashing amber turn signals for increased off-road safety.

We expect to begin shipping these units in early June. To pre-order, please contact us at 800-422-5292x114... Call today and order for $404.95

https://www.bajadesigns.com/Products/RTL-S-rear-light-bar.asp



-Bailey, Baja Designs

[email protected]



Got my reverse light kit in. Love it!!! Neighbors don't but oh well. Thanks for the quality product.


Sent from my iPhone using Tapatalk
 

JSTi07

Member
Joined
Oct 6, 2016
Posts
17
Reaction score
2
I looked on your site and the ONX6 tech sheets, but I was unable to find the overall length of the 40" light bar. Could I get that information?
 
OP
OP
Baja Designs

Baja Designs

Supporting Vendor
Supporting Vendor
Joined
Apr 12, 2012
Posts
1,748
Reaction score
1,217
I looked on your site and the ONX6 tech sheets, but I was unable to find the overall length of the 40" light bar. Could I get that information?

From End Cap to End Cap the 40" OnX6 measures 41.375".
 
Top