Search results

  1. Erjdrvr

    Something (fuel pump?) stays running after engine shutdown

    What....sounds like more Ford dealer service dept BS!
  2. Erjdrvr

    Something (fuel pump?) stays running after engine shutdown

    As I mentioned in my post above it was on for at least an hour and it shut off after I key cycled to check the battery voltage. I imagine if it stays on it will completely drain the battery! I've tuned out some of the noises because every time you walk by with your keys the truck wakes and...
  3. Erjdrvr

    Something (fuel pump?) stays running after engine shutdown

    Would this situation produce a DTC? If so which DTC module code should I be looking for as I have a bunch from the low battery event mentioned below? I also had a low battery voltage event in January, so I charged the battery and resecured the battery terminals because the truck had recently...
  4. Erjdrvr

    2021 Gen 3 Eibach Front Leveling Springs

    Here are my notes from using FORScan for the first time. Thanks to BLWN for the original post. FORScan Fox Shock Recalibration for 2019 - 2020. Neutral procedure has changed for Gen3. https://www.fordraptorforum.com/threads/how-to-2019-live-valve-recalibration-forscan.82737/ 1) Put the truck...
  5. Erjdrvr

    2021 Gen 3 Eibach Front Leveling Springs

    I would either have the dealer recalibrate the shocks or use FORScan. I believe for the Fox Live Valves to work properly (dampening) they need to know the level "Zero" starting point (FORScan shock level should be close 0mm). My truck springs had settled so my starting point was way off (lower -...
  6. Erjdrvr

    Clunking sound on Gen 3 too

    Yes I had thought about it, but it has been many issues and not just the same issue. In Indiana that's where it gets muddy as well, I just paid to put Eibachs on the truck as part of the warranty shock replacement. Additionally, I am very grateful that I received this truck so early (07/28/21...
  7. Erjdrvr

    MSRP Raptors Available

    Hey I hate ADM's but 37's still seem to be getting at least small ADM'S, plus this truck's base price is $6700 less than a 2023. Has steering wheel heat etc, might be able to negotiate a better deal etc....it's in stock today.
  8. Erjdrvr

    MSRP Raptors Available

    Just trying to help my sales rep out....nothing in it for me!
  9. Erjdrvr

    MSRP Raptors Available

    Hey my dealer in Indy has a 2022 37" PP (w/ steering wheel heat) that a just showed up & the buyer backed out. They are asking $5k over. If interested I can give the sales reps info.
  10. Erjdrvr

    Clunking sound on Gen 3 too

    Update: Rant Over lol! I called a couple different Ford dealers trying to find the back ordered shock & found out that there were only 14 shocks at dealers around the US. I then called my dealer's parts department, bypassing my service advisor, & asked about transferring a shock from another...
  11. Erjdrvr

    Clunking sound on Gen 3 too

    Mine went in Saturday for the front right. Do you mind me asking what city your located in case my dealer ordered the wrong shocks as well? IE they could transfer etc. since you will not need them. Thx
  12. Erjdrvr

    Software Updates

    I have a 21 & received 3.5.4 a couple of days ago. The truck has been hooked up to my home wifi for some time. I also do not have a cellular plan for the truck. Now getting Android Auto full screen w/ AA ver. 8.7.630224 on a Samsung Note 20. Is it possible for Ford to push these updates via...
  13. Erjdrvr

    Clunking sound on Gen 3 too

    2nd time in the last year I've taken my truck to the dealer for this issue. 2 weeks ago the dealer finally agreed SSM 50972 was the cause of the rattle. Said the part was in stock & would be in within 2 days. Then I was told it was on backorder with release scheduled 01/26. On 01/26 was told the...
  14. Erjdrvr

    2021 Gen 3 Eibach Front Leveling Springs

    Nope....4WP was not able to get the shock top nut off with out spinning the shaft. So they did not finish the work. Dropping off at my Ford dealer today.
  15. Erjdrvr

    2021 Gen 3 Eibach Front Leveling Springs

    Installed the rears on Sunday & have an appointment at 4WP on Saturday to get the fronts installed along with new camber/castor bolts. Had a chance to drive it yesterday for about 30 miles on the interstate & really couldn't tell any noticeable difference in the ride. Definitely doesn't sag as...
  16. Erjdrvr

    2021 Gen 3 Eibach Front Leveling Springs

    Blue, again thanks! According to the SPC website this kit will fit a Gen3. Amazon & 4WP has them in stock. https://spcalignment.com/component/spc/?task=part_description&pid=86252&region=USA&make=Ford&model=F-150&year=2021 - 2021&from=USAFrom&to=USATo
  17. Erjdrvr

    2021 Gen 3 Eibach Front Leveling Springs

    Hey BB, thanks! Do you have any suggestions for "quality performance caster/camber kits for all four LCA bolts"?
  18. Erjdrvr

    2021 Gen 3 Eibach Front Leveling Springs

    Just re read this post on FB regarding Eibach ride quality & Forscan leveling issue
  19. Erjdrvr

    2021 Gen 3 Eibach Front Leveling Springs

    Yes, Pro Eagle, traction mats, tools, etc....so an extra 1/2 inch should be good for me. I like the rake as well so not looking to level. Plus when I hammer on the power the rear end squats so bad etc.
  20. Erjdrvr

    2021 Gen 3 Eibach Front Leveling Springs

    I ordered the 1" front/1.5" rear springs last night. Will post up once installed, but can say the stock springs have settled.
  21. Erjdrvr

    What did you do to your Gen 3 today?

    Does anyone have the part numbers for the oil drain plug skid plate bolts & nut plates? Can't seem to find them on the Ford parts site or at the dealer. Found them for front brush guard access to the oil filter but not the drain plug.
  22. Erjdrvr

    BlueCruise Refund Info / Poll

    Returned refund info to Ford in June & received my check yesterday!
Top