Lol! I looked for well over a year to find the right car. I looked at one local to me with flaking Alpine White paint, dents, body panel rust, 150k, etc… owner wanted $25k.
These things are definitely increasing in value. Buddy has a Techno and the color is special for sure. Good luck!
Thank you. To clarify, did you adjust preload at all before installing? My understanding is that out of the box the 3.0 fronts should make the truck level on an otherwise stock setup.
Yes, I used it on my buddies Raptor that has the graphics package. Skip this as it doesn’t add much protection and pick up Beadmaker instead or one of the many spray wax’s.
Did a quick wash, changed the air filter @ 16k, wow this thing was dirty and gave it a little more pep!
I was surprised the new OEM filter is made in Mexico.
My process... bi-weekly cleaning with Brake Buster. Every 2 months I do a "reset" on the tires to strip them of any old dressing using a dedicated rubber and tire cleaner along with a Tuf Shine brush. Then if I'm going to Starbucks or the mall, I'll dress the tires and wipe to a matte shine...
LOL... ok bare with me as I try to best illustrate my experience with the CR Spotless system. I have the DIW-20 which the company claims has the ability to produce 300 gallons of de-ionized and mineral free water. I use a pressure washer with a 40 or 25 degree nozzle and only use the...
Yes, I have the CR Spotless system wall mounted and use it as the final rinse with my Kranzle pressure washer. Resin replacement isn’t cheap, but being able to wash a vehicle during lovebug season without doing a full wash is priceless.
I've only had mine on for a couple of thousand miles or so but there is a noticible improvemnt in handling. It's not a "handle on rails" type improvemnt, but does allow for quicker transitions and taking highway on ramps with more confidence. I ended up painting the brackets with 2K black...
Find another dealer or service manager with at least half a brain... FACT.
Your tune can be put back onto the truck once it's been flashed with the update.
Nice job @zemuron99. Thanks for sharing the photos. I‘m planning to tackle my transmission fluid but it looks to be a bit of a pain so I’ve held off as I don’t want to do double work. Currently researching upgrading the pan to a larger one with a drain plug to make spill and fills a bit easier.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.