Search results

Let me know how I can maybe donate something for the raffle. I haven't been active on these forums in some time but quite active on the FB Pages under Kevin H. or Eastern Shore Retros. Would be glad to help!

https://easternshoreretros.com/collections/headlights

Moved this thread over to my website due to Photobuckets bandwidth restrictions. You can now find it HERE.

Anybody done the rubber eyelet bushings on the rear shocks? Having a time getting new ones in without damage.

The harness should be an H13 motocontrol. You can swap boxes so long as the wiring is known to be fine.

Anything ever come of this. Wondering the same thing.

Check the wiring of the harness to the ballast. Check for a good ground. Sounds like it's not getting solid power and messing up the ballast. Which ballast are you running?

Correct.

Too much current on the BCM. If you have the amber portion of the switchback hooked to the OEM turn signal circuit, you will induce additional current on the circuit when voltage is not on the white circuit of the switchback. Depends how you have the lights wired. I took off all the amber...

You just need this.

O, I agree the wheel looks great. Just want the easiest and cheapest option so many others can do the same.

I was always wondering if the the new raptor wheel clock spring would work. Even then, that cost a bit as well.

The wiring is simple. It's just getting through the clock spring so these can be mounted to the wheel.

I need to get back on this. I did see that gen 2 wheel being installed but man they are expensive. I just need to dive into the wiring on the gen 1 wheel and see what I can do with the stock clock spring.

For anyone interested in separating the wiring from the BCM. You can use THIS wire harness with some minor modifications.

Just wanted to provide an update on the build. They have taken a beating over the years and have very little issues with them. (Replaced a ballast) The lenses have started to degrade and delaminate. Will post a picture later. I have since swapped the internals to a new set of headlights for a...

Similar set for an idea of what they look like on the truck.

I picked up some empty slot under the hood that was for rain sensing wiper if I recall. Cut the right side and splice a wire in for 12V Ignition. Are you tapping them into the turn signal as well? They may cause issues with your BCM if so. I made a separate relay harness to power the amber...

$900 Shipped

I have a set of Smoked OEM Ford Halogen housings painted Tuxedo Black with a Mini H1 HID projector, Morimoto 5500k bulbs, 35W ballast and relay harness for H13 equipped trucks. $925 Shipped.

These are sold. Life span depends on the build. Most parts carry a 2 year warranty at least. Some 3. Not sure what you mean by replacement parts. All the parts installed are readily available.

Sorry, wasn't getting instant notifications. I will get some pictures of them on the truck this weekend.

PM sent

2012 and older raptors came equipped with halogens that look like this. 2013 and 2014 will have HID equipped lights shown below.

These will work on any halogen equipped f150. These headlights are already sold but I do take custom orders.