progressive springs and WSI leafs

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

gbrown27

Full Access Member
Joined
Sep 17, 2012
Posts
498
Reaction score
100
Location
Auburn, Al
the guy who sells the springs at utvinc runs 37's on stock fenders. he is running middle perch with the springs like the op
 
OP
OP
beadblaster

beadblaster

Full Access Member
Joined
Oct 13, 2011
Posts
218
Reaction score
175
Location
Grand Forks, BC, Canada
To me it looks like the ride height is the same as the stock springs on the top perch. The springs are approx. 1" longer than the stock springs. The ride on mid perch is very close to the stock ride of the truck. I believe the measurement from the center of the wheel to the fender flare is 26 3/4". I will recheck later and if it is different I will repost.The springs are from UTV.
 

firematt422

Full Access Member
Joined
Feb 14, 2012
Posts
505
Reaction score
349
Location
Kansas City
I wonder if you can run 37s with stock fenders with this setup. Looks like you have a lot more room under there.

Stock rears shouldn't be much of an issue with 37s. It's the front end where you get in trouble. I don't think I've ever even seen another Raptor besides WSI's with fiberglass rear fenders.
 

Members online

Forum statistics

Threads
93,180
Posts
1,955,511
Members
56,460
Latest member
khunter
Top