5280 Raptor
Member
I had new TIS, 17x9 , negative 11 offset wheels put on yesterday. After wheels mounted the shop noticed that the RR wheel pokes about 1 inch further than the LR wheel. We confirmed the wheels are all equal by switching them around. The shop felt the bed was misaligned and loosened the 6 bed bolts to align the bed and it wouldn't move.
This is a 2020 and has never been in an accident. It was getting late and they asked that I bring it back next week and they'll see if they can make adjustments with the U bolts. FYI....the shop doing the work (5R trucks in Golden, Co) builds killer trucks and has won many SEMA awards so I know I have it at a good shop.
So what could in your opinion be causing this?
This is a 2020 and has never been in an accident. It was getting late and they asked that I bring it back next week and they'll see if they can make adjustments with the U bolts. FYI....the shop doing the work (5R trucks in Golden, Co) builds killer trucks and has won many SEMA awards so I know I have it at a good shop.
So what could in your opinion be causing this?
