RaptorScrew
FRF Addict
Up for sale are my Sick HIDs that I purchased last year. I received this setup from Brian at Sick HIDs in May/June.
They are the 5000k with the CCFL 3/4 rings as seen in the pictures. I'm selling them because I cannot deal with them any longer. I pulled/cut them out of the truck about 3 weeks ago.
When the lights were dry they worked good with the exception of needing to replace 1 inverter, 2 bulbs (two different occasions) and one ballast.
Every time I would wash the truck or it would rain outside the connections/wiring somehow would get wet (of course) but then it would short out (begin to flicker/dim) and then eventually stop working until the wiring dried out.
I'm tired of them and do not have the technical know-how to rewire them or shore up the wiring to prevent them from doing this.
I have spoken with Dawson and believe these have some value to the right person who doesn't wish to spend the extra cash for a new set but is able to fix the wiring on this set to make it work better.
I don't have the patience and wanted them out of the truck.
Again, these were cut out of the truck as you can see by the pictures.
I am asking $299 for this setup and I'll ship them (Lower 48 States Only Please). Please remember these are being sold for parts and the buyer will need to take care of the wiring to get them working again.
Both projectors, bulbs, ballasts, CCFL 3/4 rings and inverters were working when I pulled them out of the truck. I will not be held responsible for anything going forward. I feel this is a fair price.
Please PM me with any and all questions. Thanx, Rick
Notice the Passenger Side headlight inside bolt hole to secure the lights to the truck has been broken off. I received this set from Brian at Sick HID this way and used one bolt screw on the top and the one located in the front of the headlight assembly to secure it to the truck and never had any issues with vibration or looseness:
Pictures 6-8: The lenses on the headlights are are clean - no scratches or scuffs - they look bad due to fingerprints everywhere along with them being just washed and being very cold outside.
Notice Left side headlight inop and right side CCFL inop. I just washed it and then they started acting up - I'm not a wiring professional and thing that once they are rewired better they will work good:
They are the 5000k with the CCFL 3/4 rings as seen in the pictures. I'm selling them because I cannot deal with them any longer. I pulled/cut them out of the truck about 3 weeks ago.
When the lights were dry they worked good with the exception of needing to replace 1 inverter, 2 bulbs (two different occasions) and one ballast.
Every time I would wash the truck or it would rain outside the connections/wiring somehow would get wet (of course) but then it would short out (begin to flicker/dim) and then eventually stop working until the wiring dried out.
I'm tired of them and do not have the technical know-how to rewire them or shore up the wiring to prevent them from doing this.
I have spoken with Dawson and believe these have some value to the right person who doesn't wish to spend the extra cash for a new set but is able to fix the wiring on this set to make it work better.
I don't have the patience and wanted them out of the truck.
Again, these were cut out of the truck as you can see by the pictures.
I am asking $299 for this setup and I'll ship them (Lower 48 States Only Please). Please remember these are being sold for parts and the buyer will need to take care of the wiring to get them working again.
Both projectors, bulbs, ballasts, CCFL 3/4 rings and inverters were working when I pulled them out of the truck. I will not be held responsible for anything going forward. I feel this is a fair price.
Please PM me with any and all questions. Thanx, Rick
Notice the Passenger Side headlight inside bolt hole to secure the lights to the truck has been broken off. I received this set from Brian at Sick HID this way and used one bolt screw on the top and the one located in the front of the headlight assembly to secure it to the truck and never had any issues with vibration or looseness:
Pictures 6-8: The lenses on the headlights are are clean - no scratches or scuffs - they look bad due to fingerprints everywhere along with them being just washed and being very cold outside.
Notice Left side headlight inop and right side CCFL inop. I just washed it and then they started acting up - I'm not a wiring professional and thing that once they are rewired better they will work good:
Last edited: