Deaver install instructions..

Here is a little help for those guys who can't make the trip out to Gilbert to have us install your springs...



**Install Instructions** Raptor Rear Deaver Spings

Nice and simple with a perfect write up

2 question for ya:
Are the spring rates the same for the 0,+1,+2 springs?
Any idea if Deaver plans on making a Spring under for Raptor's?

A.I.I.Raciing said:

Nice and simple with a perfect write up

2 question for ya:
Are the spring rates the same for the 0,+1,+2 springs?
Any idea if Deaver plans on making a Spring under for Raptor's?

Click to expand...

The spring rates are the same between them.

Sprung under... We may or may have a set of custom Deavers here that are spec'd for our sprung under set up!

If the factory block is removed, what do you do about the bump stop? Where is the new contact point?

KaiserM715 said:

If the factory block is removed, what do you do about the bump stop? Where is the new contact point?

Click to expand...

We have that covered.. Just haven't had a chance to get it up on our site yet..

SDHQ installed +1 Deaver's and there bump stops on my new SCrew. They are easy to work, knowledgeable and I would definitely recommend them.

How does the ride compare?

Smoother...I like it a lot! Not a cheep upgrade but I would do it again.

BajaRider said:

SDHQ installed +1 Deaver's and there bump stops on my new SCrew. They are easy to work, knowledgeable and I would definitely recommend them.

Click to expand...

Thanks for making the trip out here!! And thanks for the kind words! See you soon!

SDHQ said:

Here is a little help for those guys who can't make the trip out to Gilbert to have us install your springs...



**Install Instructions** Raptor Rear Deaver Spings

Click to expand...

Some local Raptor owners and I would like to buy some (4-5 sets) Deaver Springs. We want to be 1" taller than stock.

It will be +1" Deaver Springs and maintaining factory block.

Please advise the disadvantages and weak points of this mods. Thank you!