What is this thingy on my rear brakes?

Hi,

Finally decided to checkout what I need to do for my brakes on my 3week old used purchase..

Anyone knows what this is?

Thanks!!!

http://www.fordraptorforum.com/attachment.php?attachmentid=86951&stc=1&d=1491468110

I've never noticed this on mine. I'll go head outside and check in a minute to see if that's there stock

Sent from my Pixel XL using Tapatalk

---------- Post added at 04:52 AM ---------- Previous post was at 04:47 AM ----------






Went out and got these pictures off of the driver's side rear of my truck. I have a 2013 model.

Sent from my Pixel XL using Tapatalk

mindgame100 said:

Hi,

Finally decided to checkout what I need to do for my brakes on my 3week old used purchase..

Anyone knows what this is?

Thanks!!!

http://www.fordraptorforum.com/attachment.php?attachmentid=86951&stc=1&d=1491468110

Click to expand...

It's a stock part. It's on my 2010 SCAB. There is an area toward the end where you can put a wrench on to remove. Mine was a bit rounded and corroded so I ended up just using a pipe wrench to remove. There have been past threads about it. I think it is there for vibration or something. The rear brakes were changes on the 2012+ and it was deleted I believe. Anyway it is stock. Just remove like any other brake caliper stud. Be sure to grease the guide pins during reassembly.

Sent from my SM-G930T using Tapatalk

It's a vibration damper. It's supposed to keep the brakes from chattering. Not sure if it is really that effective. It has to be removed when servicing the brakes. If you pop out the plug on the back you can remove it with a torx.

Just took this off @Hole Shot truck last week. Just extra vibration dampening for brakes. Taking it off won't have negative effects.