i've tried both dougs cut out and QTP. i've had better luck with the qtp the dougs broke in like a month although i was told that was my fault because i was operating the valve in wet conditions.
i installed the cutouts where the resonator was straight after the headers.
anyway i have a few...
Nope the oil pump is in the bottom of the engine so same one for all raptors. I don't know much about the roush but when mine broke the first time I think I was just going too fast for long In hot weather.
I would definitely recommend the JDM tune by the way my friend just got it on his roush...
Because at the amount of horsepower your getting the oil pump will definitely break.
I have the whipple and before any other upgrades just whipple and headers and I broke the oil pump twice
The oil pump feeds oil to the engine and the first component to break after the oil pump is the crank...
i tuned my buddies roush raptor from TeamJDM, now at first we had some issues as the car would turn off as the rpm would go too low, then it turned out that in the 40000km lifetime of the truck my friend never changed his spark plug so we got some NGK's and the truck is running perfect.
much...
i have seen a 13+ f150 with ipad installed but you need to jailbreak it to even use your rear view camera
its not worth the hassle, you lose a lot of functions.
i just installed mickey thompson stz's and they are much better than stock huge improvement in terms of noise and on road handling.
price is cheaper than bfgs not too sure as we have different pricing over here.
off road performance (i tried mud and sand) there is a noticeable improvement and...
i have the rigid rds 52" bar mounted on the roof and honestly im having a bit of a struggle with wind noise at higher speeds 65-70+
if i aim the bar straight or level the wind noise is definitely noticeable just like drone and its very ignorable and not really that bad
however i like to aim my...
if you want my advice get it online and shit it yourself much cheaper,
now if you referring to the bed liner as in line-x there is only one good place in qatar its the teyseer station on salwa road
if you are referring to a product like the bed rug or bak flip g2 you can get those at a few...
After speaking with TeamJDM I believe they told me 900 lb/ft not sure though i have the same one.
But before upgrading i went through 3 OEM drive shafts in about 9000 km after installing supercharger and especially after getting the 700hp package if you're careful you probably won't need it but...
The supercharger in the bed really breaks my heart [emoji174] found this in front of my garage worker told me that fuel pump malfunction due to the car being imported and apparently us raptors have different fuel pumps than ours
Sent from my iPhone using Tapatalk
Isn't there a bolt in roll cage that would provide some sort of strength without feeling every single vibration in the road.
I don't care about participating in events and legality I just want a bit of protection.
Sent from my SM-G925F using Tapatalk
How I do it (his method) is at about 65 kph I give it full gas and as soon as it down shifts before it actually down shifts just when it starts acknowledging your pedal response and the engine starts to rev up let go of the gas but it's not really a backfire as much as it is 1 or 2 pops...
Oh nope i didnt mean that sarcastically although i can see why you would understand it that way (my bad seller).
although i wouldnt reccommend 20" rims if you intend to offroad just my opinion
Ok I decided to get rid of the kooks that has been well established, however I had a qtp cutout kit laying around from another build I thought why not [emoji16]
So my kooks exhaust and headers is 1 3/4 and uncatted.
To fit the cutouts I had to delete the resonator and install them there however...
all the hangers are kooks supplied and came welded to the exhaust.
Anyways i replied to them with a link to this thread since they don't appear to be vendors on this forum, just in case they had something to say.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.