Search results

@Baja Designs do you have the ELS for the LP9 Pro Racer edition? Do you have any isolux plots to compare the LP9's, LP6's and LP4's in the different beam patterns? Do you also have candela numbers for those lights as well? I know you have it listed for the XL Racer edition at 358,731 cd. So I'm...

I know I'm late to this and you've already found what looks to be a great solution that is also cost effective but I just saw this now. I'll post up anyway as to possibly help someone else out in a similar situation. The RV awning lights from super bright led's have worked really well for me on...

They are going to be bumper mounted lights. I like the looks and the IPT of the LP6's but the 20w chips and lower price of the XL80's have me contemplating between the two options. So the LP6's do shine farther than the XL80's? Due to the fact they have more spot optics I'm guessing even...

Hey BD, any updates planned in the near future for the XL80's? Just trying to weigh all my options. I've read that quite a few people prefer the output from the XL80's over the LP6's. Do you have anything to add to those comments? Do the higher power chips in the XL80's give more distance or...

Does anyone have light output comparisons of the LP4 driving combo to the LP6 and/or XL80? Thanks.

Thanks BD. Do you have any output shots or isolux plots comparing the XL80, LP4, LP6 and LP9 all in driving combo?

Hey BD, is there anything you can share with us about updates coming to the LP9 or LP6 lights? Changes in technology of LED's, lasers or IPT, etc.? Thanks.

Are you still planning on taking photos? No worries if not.

4x4TruckLEDs.com gave you great advice. I would also mention that putting some di-electric grease in those weatherpak connectors is also a good idea. I have had half a dozen or so be corroded quite badly after 2 years of use in my northern climate. Or you could switch them out to Deutsch dt04-2P...

An email was sent out today from BD to quite a few people stating that it's a lens insert that has been tested and approved by a 3rd party testing company. Basically (from what I've read) it is a light/glare shield that blocks the upper 5% of the diode. So the output should stay roughly the same...

Please post a review when you get these if you don't mind. These are at the top of my list for fog lights.

You are correct about this. They have SAE pro and sport in both J581 driving and J583 fog and the fog lights also meet the new J583 F3 standard which is the first so far. The selective yellow also uses a 4000k LED so will most likely be the brightest selective yellow auxiliary fog to date, but...

The SAE J583 standard is there so that fog lights don't blind the heck out of oncoming traffic, pedestrians and people you are driving behind. They need to have a decent cutoff that meets the standard for light output above the glare threshold. It's also for the fact that having excessive light...

That would be greatly appreciated! Thanks!

Interesting, are your LP6's driving combo's or are they spots? Are the IPT LED's worth it to you or are they drowned out by the XL80 wide cornering lenses?

Thank you very much! I love the look of that setup you guys have on that shop truck! Do the LP6 in spot have a similar throw of light as the XL Racer edition? I'm debating between 4 LP6's or 2 xl80 driving combos and 2 xl racer's. I love the IPT lights which is making me lean towards doing the...

Do you have any pictures of the output at night with those 4 LP6's? Would you recommend 2 driving combo's and 2 spots or 4 driving combo's? Sorry to derail the thread OP.

Is that new then? The baja designs website video shows high/low mode at the 0:45 mark.

They actually have a 4 pin Deutsch connector on the back of the lights. Amber back light is not controlled with low or high mode, it is a completely separate circuit within the light so must be triggered by itself or to come on with your other clearance lights. IPT comes on with low beam and...

Much appreciated! Thank you!

Hi there, are there any vendors on here based out of Canada or will ship to Canada for a decent price that sell BD or Vision X lighting? Thanks.

Awesome! Thank you very much! If it's not too much to ask would you be able to take a photo of just 1 ADV on vs 1 single LED vs 1 multi LED cannon? Or the pair of ADV's vs a single and a multi LED? If it's a hassle to unplug them because you have all the wires and connectors zip tied up out of...

I agree, I wish more people who buy these lights would put up pictures/Videos and reviews after owning them short and long term. BD and Vision X I think are the top 2 currently but there are other good options out there as well. Not many people own both brands of similar lights to compare them...

I agree with you that BD lights are awesome pieces of engineering! Just because not many people are running vision x anymore, doesnt mean they aren't a good product or that their new products aren't equal or better than BD (I'm not sure if they are or aren't). Did you get 4 driving combo LP6's...

Great input! To be fair though, I don't have any local or even localish dealers for BD or Vision X so I can't see the lights in person. My brother in-laws and I chipped in on a pair of LP9's for my FIL sight unseen going off of BD's reputation and specs. They are truly amazing quality and the...