Recent content by TigerRaptor

Here is a few shots of mine with the Rigid 360 6" spots on a custom mount. They are very bright. Had to relocate the camera. Logo is on with double stick tape.

Just went through hell with 2 Optima Yellowtop batteries. Replaced stock battery in December due to added lighting. That battery was bad and ate my alternator. Got a new alternator and new yellowtop and it was bad. Replaced it with an Oreily Super Start AGM. No issues. Made by East Penn in...

The solenoids and tensioners were discussed before you arrived. It is mentioned early on in this thread by one of the members. Guess it was a rumor. Ford Performance Racing Oil Filter cm6731- FL820 Do not disagree here. Truck has been silent on startup for 7k. The rattle started with the...

My rattle is back after 7000 miles. It is sporadic and most noticeable after sitting for 8 plus hours. The first time I had the rattle was at 7000 miles. Strange Coincidence. Probably not. Drove it to 42k and had it fixed in December. Now I am at 49k. I have part CD Cams and Part C Sprockets. I...

Here is my setup with (4) Rigid 360- 6 spots on an Icon Impact Bumper. I also relocated the camera. Lights are very bright and the camera works perfectly. Radar cruise was relocated and works just like stock.

Yep. Easy fix! Had to do the same to mine. Just put in the Icon Impact Bumper this weekend. No adjustment needed but took 5 hours to install!

There is a bar inside the wing of the bumper. Loosen the outside bolt, pull into position. Keep in position and tighten the bolt. Should line right up. May need to play with the inside bolt on the bar if it is not where you want it.

That is what I thought too. These trucks make some noises.

Any idea where it is coming from?

Truck came back home yesterday better than new. Apparently I got use to how bad it ran over the last 18months. Idles and accelerates much smoother. Hopefully it is fixed for good. Reconnecting all my accessories with quick disconnects in case the body has to come off again. I do still have a...

Here you go. No new part number was issued when the service bulletin was issued in September only a new PCM flash. Did you get everything else changed as well or just the Phasers? New PCM flash? My parts have been in since July. Tech just cam available. Tech says he has not had any return...

Truck was back together by 1015 this morning. Pretty impressive. Should get it back today. Hopefully it is fixed.

They had the body off the truck in under 2 hours. This repair takes 2 -3 days tops. Ford knows they have bad phasers on too many stock trucks to blame a tune. 13 at my dealership this year. Enjoy your truck and do not worry about the CAM phaser Gremlins. I am happy that is what I did than worry...

Mine is under the knife as of this morning. I waited until Ford had a formal response to the problem in hope that it is a real fix. I ecouraged them to change the phasers, chains tensioners, guides and vct solenoids as my truck has rattled for 36k miles. I also had the dealership order all...