Leather Console Lid Upgrade

[Sage]

Took the lid to a custom upholstery shop. $75.00 to cover it with high quality black leather.

 

[Bsbuggs]

Just for clarification, this will work on a 2014 raptor?Part# 9L3Z-1506024-CC?

 

[mprice1234]

Just for clarification, this will work on a 2014 raptor?Part# 9L3Z-1506024-CC?

Yes, it will work but this part number has the white stitching if you are ok with that, If you want the black stitching the part number is BL3Z1606024BA.

 

[btkeenan]

Did this on my truck today after realizing they made leather wrapped ones. I ordered BL3Z1606024BA off a seller on eBay for a good price and install was smooth and took less than 10 min. I should mention I called my local dealer who kept telling me it wasn’t compatible with my truck and it was NLA but then they looked again and there was 1 left in the country but that they could not provide pricing until placing it on special order. YMMV

 

[EricM]

I bought a blue stitched leather cover on Ebay and did it myself since you can't get the blue stitching with an OEM cover.

I glued 1" thick high density foam on first. It's way nicer than OEM to use as an arm rest. Covered the foam with a layer of a muslin/batting to let the leather slide nicely over the foam. Then I glued the edges only of the leather and the console cover and attached the cover, starting at the middle in front/back, then on the sides, then work your way out from each center. Do it on a warm day and pull it tight. Trim off any excess and put the cover back together.

The contact adhesive I used is linked below. Works great.

https://www.amazon.com/gp/product/B00NOKOMBG/?tag=fordraptorforum-20

Foam

https://www.amazon.com/gp/product/B07S391HBC/?tag=fordraptorforum-20