Rogue Racing
Full Access Member
- Joined
- Feb 5, 2014
- Posts
- 570
- Reaction score
- 651
The Bump Stop Kit is nothing new to the Ford Raptor owners, but we decided to redesign it and optimize it. And although it may seem like a simple concept... we knew we could make it better. We knew what we wanted from a bump stop kit, we knew it had to seriously reinforce the frame especially when paired with our cantilever kit. So we studied what was available on the market and listened closely to what installers, dealers and owners wanted and came out with our own take on an essential Ford Raptor suspension upgrade component. The Rogue Racing Bump Stop Gusset Kit has more frame mounting points than any other kit and a whole 2" more in up travel than the competition! Works with King Air bumps or Fox. This kit caught the eye of the folks over at Shelby American and after extensive testing it exceeded thier needs and will be featured component on thier new 700hp Baja700 Edition Ford Raptor. So dont wait until After you have bent your frame to look into this kit.
Specs:
-100% American Made
-3D CAD Designed
-100% Bolt-On
-Allows for maximum up travel (+2" of travel over competitors)
-Stronger, more frame mounting points than any other kit available on the market.
-Strong 2"x 3" rectangle cross beam frame brace
-12 Point hardware on frame brace
-Works for both Sprung Over & Under Applications & up to 37" Tires on stock bedsides*
-Nut plates for easy install
-Takes a King or Fox 2.5" Bump stop
-Install time 30 min
*37" tires require weld seam on fender well to be rolled over
$999 +
Shocks
For more information visit: Rogue Racing Innovative Off-Road Suspension, Parts & Accessories
Or call 855-757-6483 for any questions.
Kit Components
Assembled Kit
Kit shown with Optional King 2.5 Air Bumps
Provided Nut Plates for easy & secure install inside frame
Details
Installed
Specs:
-100% American Made
-3D CAD Designed
-100% Bolt-On
-Allows for maximum up travel (+2" of travel over competitors)
-Stronger, more frame mounting points than any other kit available on the market.
-Strong 2"x 3" rectangle cross beam frame brace
-12 Point hardware on frame brace
-Works for both Sprung Over & Under Applications & up to 37" Tires on stock bedsides*
-Nut plates for easy install
-Takes a King or Fox 2.5" Bump stop
-Install time 30 min
*37" tires require weld seam on fender well to be rolled over
$999 +
Shocks
For more information visit: Rogue Racing Innovative Off-Road Suspension, Parts & Accessories
Or call 855-757-6483 for any questions.
Kit Components
Assembled Kit
Kit shown with Optional King 2.5 Air Bumps
Provided Nut Plates for easy & secure install inside frame
Details
Installed