Washing your Raptor

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

volfan615

Member
Joined
May 13, 2018
Posts
11
Reaction score
4
Location
Nashville
How is everyone washing the roof, hood, windshield, etc? I'm using a 6' step ladder that I have and just moving it around as I go. Is there an easier way?
 

Dragonta2z

Member
Joined
Apr 18, 2017
Posts
46
Reaction score
26
I use a step ladder as well as a foam sprayer. Works awesome



Sent from my iPhone using Tapatalk
 

TXRaptor

FRF Addict
Joined
Sep 15, 2010
Posts
1,852
Reaction score
1,051
For the hood and windshield, I step up on the running board and then to the front tire. I do not wash the roof every time, but when I do, I get as much as I can from the bed and the front door sills. (i.e. No ladder)
 

Jr24

FRF Supporting Member
Joined
Sep 27, 2017
Posts
169
Reaction score
198
Location
Middle Tennessee
I have a wash mitt made onto an extendable handle that I use for the front half of the roof and the windshield. I wash the back half of the roof standing in the bed and then while still standing in the bed, I wash the front half with the mitt on the extendable handle. It’s still tough to get the roof dried without a ladder though.
 

rtmozingo

FRF Addict
Joined
Aug 3, 2017
Posts
1,142
Reaction score
752
Location
North Texas
How is everyone washing the roof, hood, windshield, etc? I'm using a 6' step ladder that I have and just moving it around as I go. Is there an easier way?

Sadly, no. I do use a 3' step ladder for the hood tho, and get as much of the roof as I can while standing in the bed.
 

HotLap

Full Access Member
Joined
Mar 7, 2018
Posts
416
Reaction score
168
Location
SoCal
Get a 3' step ladder, much easier to move around and store. Only section I need it for is the front middle of the roof, can get to the entire windshield standing on running boards and the rear from the bed.
 

POOPonYOU

Full Access Member
Joined
May 8, 2018
Posts
637
Reaction score
375
Location
Paramount, Ca
Ceramic Coat it and you can wash it with a pressure washer and blow dry it. Or if that's too expense you can apply a good sealant every 6 to 12 months and pressure wash and blow dry with a leaf blower.
 

rtmozingo

FRF Addict
Joined
Aug 3, 2017
Posts
1,142
Reaction score
752
Location
North Texas
Ceramic Coat it and you can wash it with a pressure washer and blow dry it. Or if that's too expense you can apply a good sealant every 6 to 12 months and pressure wash and blow dry with a leaf blower.

Might work ok for those with colors like white and silver, but that's not gonna fly for black trucks. I have a coating and keep it topped off with sealant, and pressure wash isn't enough to get all the dirt off.
 

smurfslayer

Be vewwy, vewwy quiet. We’re hunting sasquatch77
Army
Joined
Dec 16, 2016
Posts
20,054
Reaction score
33,461
get in the bed to wash the back part of the roof. open the front door to get the front of the roof and one side of the windshield.

close the door, go to the other side. hose off; wash the rest of the truck and keep the previously washed panels wet. once you got all the soap off start blasting the water off with high speed air. dry / wax / polish as needed.

best plan is to let your delinquent gambler customers complete this task under your direct supervision in exchange for you forgiving part of their debt. If you’re going to do this though, best to get the most out of it - go off roading the night before.
 

Blusmbl

Full Access Member
Joined
Jul 5, 2018
Posts
138
Reaction score
47
Location
Plymouth, Michigan
I use OPT Optimum no rinse wash and wax on my black truck. I'm tall (6'3") so to do the roof I can just stand on the running board, and for the windshield I'll open a door and lean over. Been really happy with the results so far.
 

carguyohio

Full Access Member
Joined
May 15, 2018
Posts
74
Reaction score
20
Ceramic Coat it and you can wash it with a pressure washer and blow dry it. Or if that's too expense you can apply a good sealant every 6 to 12 months and pressure wash and blow dry with a leaf blower.

That is what I do on the top of my Ram currently. It is ceramic coated. I hit it with a foam cannon and pressure rinse. Roof looks perfect and a wash mit has not touched it in a year. I look forwad to the step on the raptor so I can get to the top middle part of hte windshiled, that is where I have issues with washing my Ram. Then again I am 6'2" and have long arms.
 

Forum statistics

Threads
101,113
Posts
2,151,790
Members
60,284
Latest member
Selestial
Top