Vipertoad Gen3 Raptor Build Thread

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Vipertoad

Member
Joined
Mar 29, 2017
Posts
16
Reaction score
30
Hey guys, some of you might know me from the Facebook group or Instagram (@Vipertoad). I owned two G2 Raptors previously, and just picked up a lightly used 2k mile 2021 G3 Raptor. Fully loaded with everything, minus the 37 option (highly dislike the blue interior on those). Anyways, planning a similar build route with this G3 as I did my G2 which was level, ADD PBO Bumper, 20" Light Bar, 20" Wheels, Full Body Wrap and some other misc goodies. I'm not planning on doing any tuning or performance mods as this is my daily driver and I need it reliable with great gas mileage. Also need to keep the warranty completely in-tact in case anything goes wrong.

That being said, previous owner already did a few choice mods to it! I picked it up with full front end PPF, full body ceramic coating, gold Venomrex 601 20x9 wheels, BFG 35x12.5/20 Tires, Retrax XR Bed Cover, TuxMats, and front window tint.

Here is how it looked the day it came:

IMG_2147.jpeg


Last week, I had my first round of mods done! I was able to source an ADD Pro-Bolt On that was in stock at Texas Motoworx, and had it shipped directly to a local shop here called Foutz Motorsports. They installed the ADD bumper for me, along with an RC 20" Amber DRL Light Bar, and their 2" Leveling Collar. The 2" collar was the perfect option for me as I felt the 1.5" wasn't enough and 2.25" is too much without leveling the rear. Here are some photos after the first round of mods:

6EDA392D-217C-4E74-B952-A9ACE4821CA3.jpeg


IMG_2508.jpeg


E906CBE8-2237-4EAF-836D-B4DAB463FD7A.jpeg


58B9F6A3-0BAC-42CD-B62A-948E34FE9748.jpeg
 
OP
OP
Vipertoad

Vipertoad

Member
Joined
Mar 29, 2017
Posts
16
Reaction score
30
Here's a side shot to show off the Foutz Motorsports 2" Leveling Collar:

1F0DFFC3-CA96-413B-93B2-1D2BAB181C44.jpeg


Anyways, first round of mods is done! Already SO happy with how the truck looks/sits, the stance is perfect with the 2" Foutz Collar IMO.

Yesterday, I dropped off the truck to my wrap shop of choice Colorbomb Wraps for a full color change!! I'll post photos of that once it's back from the wrap shop probably late next week.


Also, my 20" VTForged Two Piece Wheels should be here next month! These are the VTFORGED GT-5 2-Piece forged wheels, spec'd in 20x10 -24 (same as my Method 605 I have on my G2). Matte black face, gloss black lips, black hardware. I loved how the Method wheels sat on the G2 so wanted the same look/fit on this G3, but with an actual forged two piece wheel. I can't wait to get them!! Here's a sneak peak of the wheels to my exact spec/color/offset/width/etc:

18ef7db1-3d46-4d4d-9fe4-6a647a7f906d.jpeg

1071c438-e572-4aec-adc9-6ab9c7de8605.jpeg

I'll post an update as soon as the truck is back from the wrap shop!
 
Last edited:

rma

Member
Joined
Apr 19, 2018
Posts
16
Reaction score
22
Looks great.

Any change of the driving dynamics with the lift and 20” ? Especially on the highway
 
OP
OP
Vipertoad

Vipertoad

Member
Joined
Mar 29, 2017
Posts
16
Reaction score
30
Haven’t noticed any driving dynamics change, aside from it feeling a tiny bit stiffer up front, which isn’t a bad thing. Feels like it handles better and feels a lot tighter.
 

crc

Full Access Member
Joined
Jul 7, 2021
Posts
370
Reaction score
282
Location
Heath TX
Looking forward to seeing the 20x10 -24 wheels on it . Are you planning to take if off-road ?
 
OP
OP
Vipertoad

Vipertoad

Member
Joined
Mar 29, 2017
Posts
16
Reaction score
30
Thanks guys, should be out of the wrap shop this week! Can't wait to post up the new color.
 
OP
OP
Vipertoad

Vipertoad

Member
Joined
Mar 29, 2017
Posts
16
Reaction score
30
Rain guards were the AVS ones, told the wrap shop to toss them as I'm not a fan of the look.
 
Top