Help Support Ford Raptor Forum by donating:


Triple Fog Lights Kits w/Baja Designs, Rigid Radiance/D-Series & 360 Series Now Available

Discussion in 'Ford Raptor Lighting Forum [GEN 2]' started by 4x4TruckLEDs.com, Dec 19, 2018.

  1. 4x4TruckLEDs.com

    4x4TruckLEDs.com Supporting Vendor Supporting Vendor

    Posts:
    1,793
    Likes Received:
    742
    Joined:
    Jul 18, 2017
    [​IMG]

    SPECIAL SAVINGS
    Use coupon code FOGS at checkout and we'll take some $$ off your fog light kit purchase.


    Outfit your truck with some of the best LED Fog Lights money can buy. Our Triple Fog Light Kits offer you the most adjustments out of any kit on the market, while allowing you to choose exactly which lights to go with. We all live in different parts of the country/world and as such have different needs for our lighting. What works for the local Starbucks run in Wyoming might not work for the off-road enthusiast going to Baja. We got you covered though!

    Our new CrystaLux Triple Fog Light Brackets have the most adjustments of any bracket currently on the market.
    -Made in the United States (right here on Long Island)
    -11 Gauge Stainless Steel
    -Powder Coated to add another level of protection
    -Vertical Mounting points allow you to center the entire assembly in your bumper opening
    -Horizontal Mounting points allow you to slide your lights left/right
    -3 different horizontal channels to choose from allowing you to mount your lights as forward/backward in the opening as you need
    -Align each light individually up/down/left/right allowing you to focus your light precisely where you need it
    -The only fog kit on the market that offers our "Raptor Lifetime Guarantee". If you damage the CrystaLux bracket in anyway during the course of "Raptoring" we'll replace the bracket(s) free of charge (that means if you take it off a sweet jump and land on a rock crushing the stainless steel, we'll replace the bracket for you).

    Not only that, but we're the only ones currently offering extension brackets for your Baja Designs lights. Typically you would mount your lights upside down (hanging from the bracket). The downside to this is that your Baja Designs logo will be upside down and, more importantly, your lenses might be upside down. We're currently the only ones who have custom designed in-house an extension bracket that attaches to the Baja Designs lights that lets you hang them right-side up. That means a quicker and easier installation (as you do not have to remove any bezels on the Baja Designs lights).

    These extension brackets are also made right here on Long Island out of stainless steel and powder coated black as well (ensuring everything matches and a lifetime of use).

    Baja Designs Sportsmen Kit: https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-baja-designs-lights-sportsmen/
    • S2 Sport, Wide Cornering (Pair)
    • Squadron Sport, Driving/Combo (Pair)
    • Squadron Sport, Spot (Pair)
    [​IMG]

    Baja Designs Pro Kit: https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-baja-designs-lights-pro/
    • S2 Sport, Wide Cornering (Pair)
    • Squadron Pro, Driving/Combo (Pair)
    • Squadron Pro, Spot (Pair)
    [​IMG]

    Baja Designs Unlimited Kit: https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-baja-designs-lights-unlimited/
    • S2 Pro, Wide Cornering (Pair)
    • Squadron Pro, Driving/Combo (Pair)
    • Squadron Racers, Spot (Pair)
    [​IMG]

    And of course you can Build Your Own Kit: https://www.4x4truckleds.com/2017-f...ght-kit-w-baja-designs-lights-build-your-kit/
    [​IMG]

    Rigid Industries D-Series Kit: https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-rigid-industries-d-series/
    [​IMG]

    Rigid Industries Radiance Kit: https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-rigid-industries-radiance/
    [​IMG]






     
    Last edited: Mar 22, 2020
    raptor36, Glefevre87 and Kameron J like this.
  2. FastEddie

    FastEddie Full Access Member

    Posts:
    892
    Likes Received:
    296
    Joined:
    Apr 27, 2014
    Looks interesting!

    Some questions

    I have 2 sets of squadrons on hand already. Can you sell with the bracket and an S2 or bracket only?

    I would like to use one of the lights turned out as a cornering light. Is that possible? If so, which light can you turn out?

    How does this bolt up?

    Any pics of this mounted?
     
  3. 4x4TruckLEDs.com

    4x4TruckLEDs.com Supporting Vendor Supporting Vendor

    Posts:
    1,793
    Likes Received:
    742
    Joined:
    Jul 18, 2017
    Yes we do sell the brackets only. They are $149 (about $20 cheaper then Rigids).

    We stock most of the Baja Designs products so yes you could buy the brackets and a set of S2 lights. We offer all of the Baja Designs lights in any lens pattern (we stock every lens they make). So yup, you can order up the S2 lights with wide cornering (either white or amber).

    It installs almost the same way as every other kit (almost all of the kits utilize the same factory mounting locations for the most part)

    Brackets Only: http://www.4x4truckleds.com/2017-ford-raptor-fog-light-brackets/
    Brackets w/Lights: http://www.4x4truckleds.com/2017-ford-raptor-fog-light-kit-w-baja-designs-s2-squadron-lights/
    S2 Lights: http://www.4x4truckleds.com/led-driving-fog-lights/baja-designs/



    upload_2018-12-20_8-36-10.png
     
  4. FastEddie

    FastEddie Full Access Member

    Posts:
    892
    Likes Received:
    296
    Joined:
    Apr 27, 2014
    Cool.

    You have any pics showing this installed?

    Also how "aimable" are the various lights?
     
  5. 4x4TruckLEDs.com

    4x4TruckLEDs.com Supporting Vendor Supporting Vendor

    Posts:
    1,793
    Likes Received:
    742
    Joined:
    Jul 18, 2017
    We'll have some photos soon Eddie. They are adjustable up/down/left/right. I mean yeah you can't adjust them 360 degrees because you still have the bumper that will stop them eventually but you can make some slight adjustments if you need to and move them forward/back to suit your taste (they sit in a channel on the bracket so you can slide them forward/back if you need to make adjustments or run bigger lights like 3 pairs of Squadrons, although we recommend 2 pairs of squadrons and 1 pair of s2 which is why we have them setup that way, the last light would get blocked a bit, so the smaller light works best)
     
    tunedser031 likes this.
  6. FastEddie

    FastEddie Full Access Member

    Posts:
    892
    Likes Received:
    296
    Joined:
    Apr 27, 2014
    Ok. Looking forward to pics.

    What about the wiring harness. How much for that?
     
  7. 4x4TruckLEDs.com

    4x4TruckLEDs.com Supporting Vendor Supporting Vendor

    Posts:
    1,793
    Likes Received:
    742
    Joined:
    Jul 18, 2017
    All necessary wiring harnesses are included with the purchase of our Fog Kit. IF you just want to buy the brackets separate you'd need to buy the wiring adapters separate.

    Baja Designs Pairs include the necessary Y-Cable to connect the two to one circuit. Those are included in all Baja Designs pairs when you buy them. You then just need to get the upfitter harness if you want to connect it to your upfitters (which are only like $13).
     
  8. FastEddie

    FastEddie Full Access Member

    Posts:
    892
    Likes Received:
    296
    Joined:
    Apr 27, 2014
    I have 2 pair of Squadrons I pulled off my 2014. I’d like to use them, potentially with this bracket and your wiring harness. I left the old harness on the old Raptor. How much for a harness.
     
  9. 4x4TruckLEDs.com

    4x4TruckLEDs.com Supporting Vendor Supporting Vendor

    Posts:
    1,793
    Likes Received:
    742
    Joined:
    Jul 18, 2017
  10. FastEddie

    FastEddie Full Access Member

    Posts:
    892
    Likes Received:
    296
    Joined:
    Apr 27, 2014
    Cool. So if I want the 3 pairs of lights to be switched independently, do I need 3 upfitter harnesses and 3 splitter harnesses?
     

Share This Page