Track night with my SCAB

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

JPat

FRF Supporting Member
Supporting Member
Joined
Jan 12, 2020
Posts
72
Reaction score
159
Location
Florida
I am installing the Roush Perf. Pkg level 1 next week and wanted to get a baseline to measure the difference. Weather here was 85+ degrees on the West Coast of Fl.

First two runs were in 2wd and last 3 were in 4A for the launch and then switch to 2H. Needless to say, I am pretty surprised at the results as I did not think the truck would get out of the 14's.

51536137027_8c1e6d46b6_b.jpg

50507806662_6df8fafbd9_b.jpg
 

1BAD454SSv2

FRF Addict
Joined
Jan 8, 2019
Posts
1,372
Reaction score
1,687
Location
HELL I ZONA
Very good , I take it your pretty much at sea level for elevation . Any idea what your density altitude was during those runs ?
 
OP
OP
JPat

JPat

FRF Supporting Member
Supporting Member
Joined
Jan 12, 2020
Posts
72
Reaction score
159
Location
Florida
Very good , I take it your pretty much at sea level for elevation . Any idea what your density altitude was during those runs ?
Bradenton Motorsports Park and yes, about seal level. 85 degrees and about 70% humidity, probably somewhere near 1000ft of DA maybe?
 
Top