Thinking of 37s on Raptor

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

supersage

Member
Joined
Sep 27, 2021
Posts
3
Reaction score
1
Location
California
thinking of running 37s on my Gen 2 Raptor and putting on Geisers with Deaver +3 with some fender trimming.. worth it? Or should I keep 35s? Or should I keep 35s but run just deavers or both Geiser and Deaver?
 

Jeff-Ohio

Full Access Member
Joined
Nov 3, 2016
Posts
909
Reaction score
451
Location
Cincinnati
thinking of running 37s on my Gen 2 Raptor and putting on Geisers with Deaver +3 with some fender trimming.. worth it? Or should I keep 35s? Or should I keep 35s but run just deavers or both Geiser and Deaver?
Definitely do it. That is my current setup and no trimming is required.
 

Jeff550

Active Member
Joined
Nov 1, 2021
Posts
79
Reaction score
55
Location
California
Not sure I understand. I have that exact same setup with zero issues. What is the basis of your comment?
The fact that 37s (even small KM3's) rub the liner, pinch welds, a little on the washer tank, and all the wiring harness that are right on the other side of the liner, when the liners rip out lol
 
Top