Sway Bar End Links?

[nikhsub1]

So I put on some Alcons today and noticed my Sway Bar End Links are pretty jacked up, boots torn etc. Looks like a **** design if you ask me. Any aftermarket units that might last more than 25k miles? TIA.

 

[GCATX]

We slapped some Moog's on the 2010 last week, no idea if they are better than OEM. I would avoid any heim joint ones if they make them, the get sloppy pretty quick. I have 76k on my 18, I assume they are still tight, I don't sense any clunking or banging, so haven't checked the boots. YMMV

 

[nikhsub1]

We slapped some Moog's on the 2010 last week, no idea if they are better than OEM. I would avoid any heim joint ones if they make them, the get sloppy pretty quick. I have 76k on my 18, I assume they are still tight, I don't sense any clunking or banging, so haven't checked the boots. YMMV

I ordered the gen 1 moog units from amazon. If they don’t fit i’ll send them back and just go oem.

 

[nikhsub1]

Well the Gen 1 moog units definitely don't fit, they are way too long. Ordered some OEM end links...

 

[CoronaRaptor]

Well the Gen 1 moog units definitely don't fit, they are way too long. Ordered some OEM end links...

Good info!!

 

[GCATX]

Well the Gen 1 moog units definitely don't fit, they are way too long. Ordered some OEM end links...

Do you have a gen 2 or Gen 1? I hope I didn't mis-speak, but we put Moog links on our Gen 1. The stock links on our Gen 2 are still good.

 

[nikhsub1]

No I knew they were for gen 1 just couldn't figure if they fit gen 2. They don't...