Triple Fog Light Kits Featuring 100% American Made/Stainless Steel Brackets

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

MattR

Full Access Member
Joined
Nov 24, 2019
Posts
885
Reaction score
516
Location
Houston, TX
Do the brackets that come with the kit tuck half of the inner-most lights behind the bumper or do your brackets allow 100% of the light output to be directed forward?

Some brackets I've seen cut the inner-most lights off about halfway across.
 
OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
The lights slide in a channel. So you can slide the lights outwards a little bit. This will allow you to run 3 sets of Squadrons if you wanted and slide the lights out more. Within the next few weeks is a new generation of brackets being released. This will give you the most adjust-ability out of any bracket on the market. So keep your eyes peeled :)
 
OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
Yet more happy customers

Jeffrey had the following to say about our Triple Fog Light Kit

Thanks Adam for excellent service and follow-up! Baja design foglights are amazing and a much needed addition to any Raptor. My order came on time and complete. The instructions provided with the kit could be more detailed with better pictures to help with the install. The custom wiring harness was perfect. I will order from 4x4truckleds.com again! Thanks

We'll make sure we revise our instructions and add some more photos in the upcoming weeks Jeff!

Our SPP Triple Fog Light Kits include everything you need in 1 easy to install kit.

-Stainless Steel Brackets made right here in America. Designed by a Roush dealer to serve a purpose (a high quality adjustable bracket)
-3 Pairs of Lights of your choosing so that you get the best bang for your buck
-A custom-made, Raptor specific all-in-one wiring harness to make things real quick and easy on the installation side
-All the nuts/bolts/instructions you need to get this bolt-on kit installed in no-time.

Plus we're always at your disposal to offer tips/tricks and assistance.

You can settle for other fog kits that have cheap brackets that bend at the mounting locations. OR you can grab this kit with some of the most sturdy, adjustable brackets on the market. We're also letting you choose all 3 pairs of lights, so we're not locking you into a light you're stuck with.

Not sure what lenses to go with? Well let us help you pick, and if you go with the Baja Designs lights you can always change them out later on... WITHOUT removing the lights/brackets. Our kits let you change your lenses quick and easy. You don't have to disconnect any wires, remove any brackets or remove the lights. Can't beat that.

Available here with your choice of Baja Designs or Rigid Industries lights (you can also grab the brackets/wiring harness and use whatever lights you like)

http://www.4x4truckleds.com/specialty-performance-parts/

79378823_2311866539105470_1558090044793683968_n.jpg
 
OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
Those are all going out today. With the holidays it took 2 damn weeks for UPS/FedEx to get us our inventory (Baja is in CA, we're in NY... so we're the furthest shipping time from them). All the fog kits are picked and ready to go, just waiting on the SAEs to come in today and we can get them all out (it's the last piece of the puzzle).
 

RaptorVette

Full Access Member
Joined
Oct 12, 2012
Posts
455
Reaction score
391
Location
Corpus Christi, TX
I installed these recently. First pic is the headlights on low beam, next is 4 Pros in wide cornering with the outside lights angled out. Last is all 6 lights the 2 in the middle are Pros with a combo lense.

20200102_185223.jpg

20200102_185243.jpg

20200102_185257.jpg

20191228_171050.jpg
 
Last edited:
OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
Looks great. For those of you anxiously waiting on the SAE... check your inboxes... all the back ordered fog kits have shipped... here are a few of them

81168063_10216068950131956_2865284399555936256_o.jpg
 
OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
*rings dinner bell*

Ya'll come and get it!!!

Got plenty of Baja Designs SAE lights in stock. Get your orders in now. While we're not as fast as Amazon (let's face it, those guys just sit with a van full of goodies at the end of your block waiting for you to place an order) we'll get them to you REAL FAST.

81199330_2502906936594350_3675444986838515712_n.jpg
 
OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
We're happy to give the FordRaptorForum community a sneak peak at the last fog light brackets you'll ever need/want. Coming soon (2 weeks or so) are our new CrystaLux Triple Fog Light Brackets for the Gen2 Raptors.

We've spent the last few months working on these and they are just about ready to ship. We've been listening to our customers over the last year. What they liked, what they didn't like, what they wanted to see and we put it all together in a really kick-ass bracket.

These brackets offer the most versatility out of any bracket currently available on the market.

-Manufactured right here on Long Island (that's New York) out of 11 gauge stainless steel. Finished in a black powder coating to ensure durability.
-The brackets feature 2 vertical mounting points which allow you to slide the entire assembly up/down within your bumper opening. This ensures your lights are centered.
-There are 3 horizontal mounting channels to choose from, where you can install your lights. This allows the brackets to accommodate most cube lights on the market along with personal preference for installation.
-An industry first... Reverse Mounting Brackets are available for Baja Designs lights. These allow you to install your lights right-side up (no removal of the bezels/lenses, which makes for a quick installation). Made out of stainless steel and powder coated black as well. No other company currently offers these for Baja Designs lights.
-Available with and without our custom designed, Raptor specific wiring harnesses
-And of course these brackets include our Raptor Lifetime Guarantee. We'll warranty these brackets for as long as you own your Raptor. If you destroy them in any way, we'll replace them... FREE. If you damage/bend/break these brackets in the course of "Raptoring" they are covered (that includes flipping your truck, crashing your truck, hitting those jumps, etc...). We got you covered!

82344940_764561520722655_3621898877940006912_n.jpg


82295869_2482745275318338_1626193747773489152_n.jpg


81386700_2778192485552362_8075253147498446848_n.jpg


These will be available soon (about 2 weeks). For now you can enjoy our promotional video:

 
Last edited:

MattR

Full Access Member
Joined
Nov 24, 2019
Posts
885
Reaction score
516
Location
Houston, TX
The lights slide in a channel. So you can slide the lights outwards a little bit. This will allow you to run 3 sets of Squadrons if you wanted and slide the lights out more. Within the next few weeks is a new generation of brackets being released. This will give you the most adjust-ability out of any bracket on the market. So keep your eyes peeled :)

Trade an old for the new?
 
Top