Rubber Body Panel Plugs

Chzhead

Full Access Member
Joined
Aug 25, 2019
Posts
173
Reaction score
126
Location
Wisconsin
I've tried to search here and have not found anything. Also cannot find anything on google for the Gen 1's. I changed my oil the other day and noticed my plugs......well "tape"......that covers the back side of the body panels holes are starting to come off (1 is already gone). I took a few pics (don't mind the bit of Utah I still have with me). Most are peeling really bad and REALLY don't want to keep these exposed going into winter.


I'm looking to see if I can find rubber plugs to replace these. I know my 2002 F150 had them but can't find anything for my 2013. Looking for something similar to this
Rubber Body Plug & Grommet Kit

Anyone come across anything like these??
 

Attachments

  • IMG_7915.JPG
    IMG_7915.JPG
    72.1 KB · Views: 36
  • IMG_7916.JPG
    IMG_7916.JPG
    64 KB · Views: 36

roush_14

Full Access Member
Joined
Nov 14, 2021
Posts
114
Reaction score
165
Location
Rhode Island
I would be as well. I put new tape on before last winter but would rather have the caps, the older f150s had them but I was never able to locate a part number.
 

Gryphon313

Active Member
Joined
Oct 6, 2022
Posts
99
Reaction score
164
Location
Western, WA
Last edited:
OP
OP
Chzhead

Chzhead

Full Access Member
Joined
Aug 25, 2019
Posts
173
Reaction score
126
Location
Wisconsin

TAC71

Full Access Member
Joined
Jan 4, 2021
Posts
108
Reaction score
280
Location
Osoyoos BC Canada
I first tried ordering some different types of plastic and rubber plugs to replace the tape. None of them fit great. I contemplated using gorilla tape but wasn't fond of the idea. I really wanted a cap so it could be easily removed for the spray oil I use for rust prevention.
Where I work we have several wrecked / parts trucks. All Fords about 2010 or so vintage , F150 250 and 350. On the floor of the cab there is 4 plugs that fit perfectly in the G1 Raptor. It obviously takes a few trucks to get what you need.
 
OP
OP
Chzhead

Chzhead

Full Access Member
Joined
Aug 25, 2019
Posts
173
Reaction score
126
Location
Wisconsin
I first tried ordering some different types of plastic and rubber plugs to replace the tape. None of them fit great. I contemplated using gorilla tape but wasn't fond of the idea. I really wanted a cap so it could be easily removed for the spray oil I use for rust prevention.
Where I work we have several wrecked / parts trucks. All Fords about 2010 or so vintage , F150 250 and 350. On the floor of the cab there is 4 plugs that fit perfectly in the G1 Raptor. It obviously takes a few trucks to get what you need.
Ooohh....I think your on to it. I think these look about right???


I'll have to swing by my dealer and see if these work
 
Top