Rear Shock Seal help

[Jhollowell]

I'm rebuilding a set of rear shocks and i believe they were off a 2010 6.2. I bought the seal kit but the white seal that goes in the top cap seems too big for the groove. Were there different seal kits for the older shocks? here's a pic of the cap. I can't measure the width of the groove but it does not seem like the white seal will fit and i already threw away the old seals so i can't compare. You can kind of see the bottom groove is a lot more narrow than the other 2.

 

[Bozz]

Fox Shocks | '10-14 Ford Raptor OEM Rebuild Kits

Maintain or rebuild your Gen1 (10-14) Raptor's OEM shocks with Fox OEM rebuild Kits and parts SDHQ stocks all of these parts to rebuild your Raptor's OEM Shocks

sdhqoffroad.com

You are being redirected...

 

[Jhollowell]

i found out this cap uses an O-Ring instead of the wiper seal. The kit i have came with both.