Raptor Chase /Emergency lights

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ImAllSCREWdUp

Full Access Member
Joined
Jan 28, 2021
Posts
118
Reaction score
101
Location
PG Co. MD
@MDRAPTR installed my Speed Turtle 3.0 Module and the visor lights and I agree, nice quality and easy installs.
 

Attachments

  • 20221112_072410.jpg
    20221112_072410.jpg
    129.5 KB · Views: 35
  • 20221112_072353.jpg
    20221112_072353.jpg
    242.4 KB · Views: 35
  • 20221112_072758.mp4
    3.1 MB

ImAllSCREWdUp

Full Access Member
Joined
Jan 28, 2021
Posts
118
Reaction score
101
Location
PG Co. MD
I e always wondered how strong those visor brackets are each light has to be 5-7 lbs right? Looks good though what’s a Speed turtle?
The brackets are single piece, powder-coated steel. I ordered the ones specifically for F150s but the kit came with universals as well. They tooth into the plastic sun visor mount trims and are very sturdy. All the hardware is 7mm, matching the size of the visor mount hardware (well thought out). The lights are only a couple pounds a piece and they dont bounce at all. Only issue I have is there's no easy way to hard wire these and maintain the pattern toggle switch. As a result, I have them running off the cigar lighter :confused: not a fan of visible wires.

The Speed Turtle is a module that plugs into the BCM and strobes the stock lights. Its programable and can be trigged by a quick double-tap on the high beam switch. There is also a lead included for a stand alone switch. I plan on reprograming it this weekend.

Speed Turtle 3.0
 

Attachments

  • 20221201_054040.mp4
    6.9 MB
  • 20221201_053727.mp4
    4.4 MB

RotorOver

Full Access Member
Joined
Jun 28, 2021
Posts
434
Reaction score
686
Location
Greater Atlanta
The brackets are single piece, powder-coated steel. I ordered the ones specifically for F150s but the kit came with universals as well. They tooth into the plastic sun visor mount trims and are very sturdy. All the hardware is 7mm, matching the size of the visor mount hardware (well thought out). The lights are only a couple pounds a piece and they dont bounce at all. Only issue I have is there's no easy way to hard wire these and maintain the pattern toggle switch. As a result, I have them running off the cigar lighter :confused: not a fan of visible wires.

The Speed Turtle is a module that plugs into the BCM and strobes the stock lights. Its programable and can be trigged by a quick double-tap on the high beam switch. There is also a lead included for a stand alone switch. I plan on reprograming it this weekend.

Speed Turtle 3.0
So, the Speed Turtle 3.0 works on the MY21+ trucks? The website says through 2015-2019 F-150. Looks like a great solution.
 
Top