Pipe diameter on stock exhaust?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

maxwell018867

Member
Joined
Jul 8, 2021
Posts
7
Reaction score
9
Location
michigan
I’m lookin to get a custom exhaust done soon that’s after the cats and spits out in front of the passenger rear tire. I’ve got a 2010 Raptor with the 5.4l without the resonator so I don’t know if that plays a part, but I’ve been trying to figure out the stock pipe diameter so I know what muffler to look for. I’ve heard people say it’s 2 1/2 inch and others say 3. Any clarity would be greatly appreciated
 

Jakenbake

FRF Addict
Joined
Sep 20, 2017
Posts
1,792
Reaction score
2,448
I vote tri Y headers, with equal runs of pipe to an x pipe then to some boom tubes!

I’m not sure what came on the 5.4, you could just crawl under there and measure it.
 
OP
OP
maxwell018867

maxwell018867

Member
Joined
Jul 8, 2021
Posts
7
Reaction score
9
Location
michigan
I so badly wanna go with some nice headers , but it might be something for later down the line. That is of my 5.4 is still kickin by then.
 
Top