Perimeter Alarm System DL3Z-19A361-A Install

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

tevans76182

Member
Joined
Sep 2, 2023
Posts
1
Reaction score
0
Location
Fort Worth, TX
I just installed this unit on my 2014 F-250 gas pickup. The shock sensor workes well, but I can't get the remote start to work with the factory fob. I completed the 8 key-turn programming for the unit, and then used Forscan to enable Remote Start. I also went into the trucks' info-center and enabled Remote Start there as well. However, using the standard fob and the lock-unlock-lock sequence, nothing happens. Any ideas what the issue could be?
 
OP
OP
Gary E

Gary E

Full Access Member
Joined
Jun 11, 2017
Posts
917
Reaction score
732
Location
Medford, Oregon
I do not have any suggestions for a fix. Just wanted to report that the remote start works fine on my '14 SCAB with the unit installed.
 
Top