Here is a Winch Mount we just completed for a customer. It's completely bolt on. The base is 3/8" steel and the fair lead mount is 1/4" steel. The mount is attached by the tow hook mounts and the hooks are still utilized. This mount was designed for a WARN XD 9000i. Compared to most mounts we use 3/8" steel plate and mount it to the frame rails not the bumper mounts. This system will also work with our Raptor bumper. We can also drill for different style winches. This system will cost $485.00 and it won't peel off the truck or pull your bumper off. Remember Raptor have 7300 GVWR and if you are winching you are probably pulling a little bit more the that !!!