NEW Gorilla Automotive Black Factory Style Wheel Lock System 14mm x 1.50

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

raisins

FRF Supporting Member
Supporting Member
Joined
Jan 30, 2017
Posts
273
Reaction score
135
Location
NJ
Hey folks. Up for sale are 1 set of 20 and 1 set of 4 lug nuts that fit OEM wheels on a Gen 2 Raptor. I purchased these with intentions to use them on my Method wheels, but they do NOT fit. Only 1 lug was taken out of the box to test the width on the Method wheels, none of these were ever installed. I had a hard time finding a complete set of 24 so I purchased one set of 20 that are a locking set and another 4 that are basic. Once installed, I doubt you could tell the difference. I paid $110 for the set, but willing to take $90 shipped.

Part numbers for the sets are:

Pack of 4: 61147BCX
Pack of 20: 96643BDX

Again... these will fit only the OEM wheels on a Gen 2 Raptor. Thread pitch is 1.5mm

Text 9739197011 or PM on here :)

0Shot%202018-11-08%20at%201.34.57%20PM_zpsrlihuptj.png

0Shot%202018-11-08%20at%201.35.04%20PM_zpsalshmvqk.png

0Shot%202018-11-08%20at%201.36.26%20PM_zpsb1ueogpi.png

0Shot%202018-11-08%20at%201.37.12%20PM_zpswzfsju6x.png

 

Raptor911

FRF Addict
Joined
Aug 9, 2012
Posts
4,690
Reaction score
2,251
Location
Ashburn, VA
I am confused about the statement below. I understand it will only fit the gen2 trucks because of the thread pitch but are you also saying it only fits the oem wheels? Will it fit aftermarket wheels?


Again... these will fit only the OEM wheels on a Gen 2 Raptor. Thread pitch is 1.5mm

0Shot%202018-11-08%20at%201.34.57%20PM_zpsrlihuptj.png

0Shot%202018-11-08%20at%201.35.04%20PM_zpsalshmvqk.png

0Shot%202018-11-08%20at%201.36.26%20PM_zpsb1ueogpi.png

0Shot%202018-11-08%20at%201.37.12%20PM_zpswzfsju6x.png
 
OP
OP
raisins

raisins

FRF Supporting Member
Supporting Member
Joined
Jan 30, 2017
Posts
273
Reaction score
135
Location
NJ
I am confused about the statement below. I understand it will only fit the gen2 trucks because of the thread pitch but are you also saying it only fits the oem wheels? Will it fit aftermarket wheels?

I am not sure of all aftermarket wheels, I just know it won't fit Method NV wheels due to the width size of taper at the end. The lugnut will not fit in the hole and I'm assuming that this would apply for most aftermarket wheels. I do know they fit OEM alloy and beadlock wheels. Most guys I've seen swap over the silver OEM lugs to these so the lug nuts match the color.
 

EricM

FRF Addict
Joined
May 11, 2016
Posts
3,174
Reaction score
2,658
Location
OHIO
I am confused about the statement below. I understand it will only fit the gen2 trucks because of the thread pitch but are you also saying it only fits the oem wheels? Will it fit aftermarket wheels?


Most aftermarket wheels cannot use the stock lug nuts, they are too big. You have to buy skinny spline style lug nuts.
 
Top