New Gen 1 Owner in SoCal.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
P
Joined
Jun 17, 2021
Posts
4
Reaction score
11
Location
San Diego, CA
Here's a few. Still going through the truck. Just finished installing R1 Concepts rotors and pads at all 4 corners. Needs shocks rebuilt or might go 3.0. Looking for new wheels and 37" tires.
 

Attachments

  • 16242244569782503896480289650295.jpg
    16242244569782503896480289650295.jpg
    155.8 KB · Views: 23
  • 16242244777824877818575295114497.jpg
    16242244777824877818575295114497.jpg
    172.6 KB · Views: 23

MrGable27

Full Access Member
Joined
Oct 20, 2019
Posts
105
Reaction score
135
Location
High Desert
Here's a few. Still going through the truck. Just finished installing R1 Concepts rotors and pads at all 4 corners. Needs shocks rebuilt or might go 3.0. Looking for new wheels and 37" tires.
Just bite the bullet and go with 3.0s. I wasted $900 and a bunch of install time messing with rebuilds at first; ended up switching to Kings after 8 months.
 

Beastalo

Member
Joined
Jun 12, 2020
Posts
29
Reaction score
37
Location
Downey, CA
I’m not a mechanical guy, but my 2013 with a Roush SC / Roush exhaust was put in by Ken Grody Ford. I asked for dyno numbers but they said that dynos unnecessarily wear the engine......hmmm. Your truck looks awesome and enjoy it. Get it dirty!
I’m looking to upgrade my brakes, but Ken Grody said 10k for any upgrade worth while.
 
OP
OP
P
Joined
Jun 17, 2021
Posts
4
Reaction score
11
Location
San Diego, CA
I like it! Congrats. Did it come with any dyno numbers? I like where you're going with the mods.
Thanks, No it did not. Prior owner had no knowledge. Spoke with Procharger kit was purchased in 2011. So looks like it was done when new. Prior owner owned since 2015/2016 50k. He just did the basic maintenance. Truck is originally from Boise, Idaho. I picked up from Idaho Falls, Idaho. Will be sending to JBA here in San Diego for a new updated tune as tech has changed quite a bit since 2011!
 
OP
OP
P
Joined
Jun 17, 2021
Posts
4
Reaction score
11
Location
San Diego, CA
I’m not a mechanical guy, but my 2013 with a Roush SC / Roush exhaust was put in by Ken Grody Ford. I asked for dyno numbers but they said that dynos unnecessarily wear the engine......hmmm. Your truck looks awesome and enjoy it. Get it dirty!
I’m looking to upgrade my brakes, but Ken Grody said 10k for any upgrade worth while.
I just did new geomet rotors and pads from R1 Concepts. Have used them before on my F-350 and SRT's. Good stopping power without a Big Brake Kit upgrade and decently priced. The whole setup for the Raptor was right around 400.00. I did my own install.
 
Top