My Roush SC Install

[HAP]

Side mirror turn signal strips......where did you get that?

Sent from my SM-G920V using Tapatalk

There was a member on here that made a handful of these as an experiment; I just happened to get one. They are back lit but I never hooked the wire up. Not crazy about how they looked illuminated...

R,
HAP

 

[Squid 3]

Yea I saw that. That's why I was asking about part numbers. My filter doesn't look like that one

# 997-466 is the replacement part number.
Don't freak out that it's MUCH smaller than the original because it is
I just wen't through this with Roush and they assured me that this is right

 

[svt_reid]

Okay thanks!

 

[Geldingmakr]

Thought I would add a little more contrast to my CAI. A few minutes with a silver paint pen did the trick for me.

BTW MOD's, I intended to post this thread in the 6.2 section but it ended up here. Your discretion to move...

R,
HAP

View attachment 244033
View attachment 244034

Thanks for this idea!! Completed today

 

[MTF]

Thanks for this idea!! Completed today View attachment 346383

That filter is dry and you should be cleaning and oiling more often.
I bought a second filter so I can clean and oil one while the other one is in the truck.

 

[Geldingmakr]

That filter is dry and you should be cleaning and oiling more often.
I bought a second filter so I can clean and oil one while the other one is in the truck.

Thanks, I have a lot to learn apparently I should look in to relocating my Fuse 27 and a JDM tune as well

 

[HAP]

JDM tune is a MUST!
R,
HAP

 

[MTF]

Thanks, I have a lot to learn apparently I should look in to relocating my Fuse 27 and a JDM tune as well

The fuse thing is a good idea, at least change the fuse to a mini instead of the micro.
I didn't do the relocation, but I did change the fuse way back in 2012.
The micro fuse blades are not wide enough, and that makes the connection at the edge of the blades creating a hot spot.