c-ne-elk
Full Access Member
Kudo's to Dawson at Raptor Retrofit! Excellent product and he even made sure I could get my lights in time to install before I take off on a 1.5 week trip! I never expected that when I ordered them but once Dawson found out I was leaving he jumped on them and got them to me. WHAT A DIFFERENCE these lights make! Not only do they look great, but they also light up the night!
Dawson aka Ducati, U DA MAN!!!!
Here is my build:
MH1
Reflector Blacked out
Turn Signal Blacked out
Side amber reflector tinted
Gatling Gun Shroud painted Ingot Silver
LED Rings - outer
5000k bulb temp
It took me less than 2 hours to install and adjust the lights, super easy. If you do an install about all you need is a 10mm socket to remove and replace the 3 bolts that hold the lights in. Will also need a self tapping screw to mount the relay to the sub frame, can use exisiting holes to mount the ballast with the bolt and nut that is provided. Be sure to wire brush/sand the paint off the frame at the rear of the ballast to get a good contact for your ground. Just watch Dawson's video, it really is as easy as it looks.
Here is what they look like:
Dawson aka Ducati, U DA MAN!!!!
Here is my build:
MH1
Reflector Blacked out
Turn Signal Blacked out
Side amber reflector tinted
Gatling Gun Shroud painted Ingot Silver
LED Rings - outer
5000k bulb temp
It took me less than 2 hours to install and adjust the lights, super easy. If you do an install about all you need is a 10mm socket to remove and replace the 3 bolts that hold the lights in. Will also need a self tapping screw to mount the relay to the sub frame, can use exisiting holes to mount the ballast with the bolt and nut that is provided. Be sure to wire brush/sand the paint off the frame at the rear of the ballast to get a good contact for your ground. Just watch Dawson's video, it really is as easy as it looks.
Here is what they look like: