GEN 2 Interior LEDs?

[Raptor911]

Can someone speak to LEDs in the interior of the the Raptor? I have a 2019 coming and plans to pick up a few things on black Friday. I know I will need LEDs for the rear license plate but what about the interior cabin?

 

[Raptor18Actual]

Interior cabin should be all LEDs already - my 2018 was. I only had to change out the license plate lights.

 

[bo1966]

Interior cabin should be all LEDs already - my 2018 was. I only had to change out the license plate lights.

How did you get the bulbs out without breaking shattering them?. A buddy with a 150 tried and couldn't get it out with his fingers so he tried a pair of pliers and broke both bulbs.

 

[Raptorguy1]

Interior cabin should be all LEDs already - my 2018 was. I only had to change out the license plate lights.

I think the vanity mirrors are the only non LED's. This place sells those.
https://www.f150leds.com/collection...products/17-18_raptor_vanity_mirror_light_led

 

[Raptor18Actual]

How did you get the bulbs out without breaking shattering them?. A buddy with a 150 tried and couldn't get it out with his fingers so he tried a pair of pliers and broke both bulbs.

Patience. Mine were tough to pull out; I had to resist using pliers because I was scared the bulb would break. Just kept working it back and forth in the socket until it finally came free.

I think the vanity mirrors are the only non LED's. This place sells those.
https://www.f150leds.com/collection...products/17-18_raptor_vanity_mirror_light_led

My vanity mirrors seem to be LED...they don't look like incandescent to me.

 

[docskeet1]

I wore Mechanix gloves and wrapped a piece of thin rubber around the bulb. Be patient and they come out eventually.

 

[Nick@ApolloOffroad]

Every bulb on the truck is LED other than the license plate.

Here's our recommendation: Rear License Plate Kits - 2017+ Ford Raptor

 

[Gilligan]

How did you get the bulbs out without breaking shattering them?. A buddy with a 150 tried and couldn't get it out with his fingers so he tried a pair of pliers and broke both bulbs.

Bahaha how many homos does it take to unscrew a light bulb??


You take moron to the next level.

 

[GR8Ride]

Really? You’re proud of these comments??


Sent from my iPhone using Tapatalk

 

[Krillin]

i bruised my index finger trying to wiggle them out

 

[sdgros01]

They were a pia to get out but my trick to them is remove the bulb holder itself by disconnecting the hardshell, then Take a 90 degree pick and go in through the hole at the bottom of each bulb housing and wiggle. They pop right out with zero to no effort. After spending 10 minutes with pliers and rubberized gloves as a barrier to the pliers I realized this and they were out in no time.


Sent from my iPhone using Tapatalk