Installation of the NEW Plug N Play SPV Tail Light Adapter & Backlight Adapter (For Reverse Trigger/Backlights WITHOUT Splicing/Tapping)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Specialtyperformanceparts

Supporting Vendor
Supporting Vendor
Joined
Jul 15, 2017
Posts
1,021
Reaction score
922
These 2 tutorial videos are pretty quick and to the point. They show JUST HOW EASY it is to plug in one of our adapters from our new harness system into your truck to get access to reverse trigger to power backup lights, or to power backup lights for light series like Radiance, Scene, 360, Baja Designs LP4, LP6 and so on.

Unlike factory harnesses, or anything else out there... they tell you to take a side splice clip and clip onto your reverse wire.... OUCH! Who wants to tap into their factory harness? This can sometimes lead to warranty issues, corrosion, etc. Our solutions are plug n play. They plug into the factory harness. This way, should you ever need to remove them, you just unplug them... and your 100% stock...

SPECIAL OFFER

We are offering a special deal to ANY of our customers who have purchased the backlight wire kit and would prefer to change to the new Backlight Adapter Method. The backlight wire kit is still an option, and still available for the same $12.99 as before. The backlight ADAPTER is on sale for $39.99. Anyone who previously purchased the backlight wire adapter and would like to switch, we will give you full credit for the amount you paid for the backlight wire kit off the sale price of the backlight adapter and we will ship it to you for free.

Here is what you need to do-

Email us at INFO @ SPVparts.com

Tell us your Name, and if you can find it, order number. We will send you an electronic cart to your email, which you can check out at the special discount with free shipping. This offer is effective 5/14/21 thru 6/15/21. This pertains to the Backlight Adapter only. Not the Tail Light Adapter. NOTE: You must specify the YEAR of your Raptor for the correct module.

John

Tail Light Adapter-


Backlight Adapter-

 

OEMPlus Raptor

OEM preferred....
Joined
Aug 17, 2020
Posts
978
Reaction score
1,057
Location
Oxnard CA
How much and will these work with my BD S2 Sports, mine currently turn on the reverse lights as well when I turn on my BD's with the Aux switch?
 
OP
OP
Specialtyperformanceparts

Specialtyperformanceparts

Supporting Vendor
Supporting Vendor
Joined
Jul 15, 2017
Posts
1,021
Reaction score
922
Yes. They absolutely will work with any Rigid, BD, or other LED lights that are 2 amps or less each (so that’s Rigid D-Series, SR-M, SR-L, Baja, Squadrons or S2’s should all be 2 amps or less.
 
OP
OP
Specialtyperformanceparts

Specialtyperformanceparts

Supporting Vendor
Supporting Vendor
Joined
Jul 15, 2017
Posts
1,021
Reaction score
922
Here is our Harness Section-

 
OP
OP
Specialtyperformanceparts

Specialtyperformanceparts

Supporting Vendor
Supporting Vendor
Joined
Jul 15, 2017
Posts
1,021
Reaction score
922
There is a harness that is about 12 foot long that goes from the rear lights and connects to the switch wires in the engine bay. That allows you to turn them on and off with the switch. Then, there is the plug in tail light adapter that plugs into the tail light and the other end plugs into the 12’ harness by where the lights plug into it. It then supplies power to the lights when the truck is in reverse as the power to the reverse lights in the tail lights transfers power to the additional lights too. Does that make sense?

john
 

RPsG2Rap

Member
Joined
Nov 18, 2020
Posts
10
Reaction score
9
Location
California
There is a harness that is about 12 foot long that goes from the rear lights and connects to the switch wires in the engine bay. That allows you to turn them on and off with the switch. Then, there is the plug in tail light adapter that plugs into the tail light and the other end plugs into the 12’ harness by where the lights plug into it. It then supplies power to the lights when the truck is in reverse as the power to the reverse lights in the tail lights transfers power to the additional lights too. Does that make sense?

john
Thanks yep I figured that you still needed to link to the switch wires under the hood so yes makes perfect sense. Thanks John
 
OP
OP
Specialtyperformanceparts

Specialtyperformanceparts

Supporting Vendor
Supporting Vendor
Joined
Jul 15, 2017
Posts
1,021
Reaction score
922
Yes. I have a kit for that. It is basically a 6 way connector. It connects to all 6 wires, then it leads out to 6 more with single WP connectors that just plug into our various harnesses.
Of course, if you get our harnesses, they come with single connectors that you can add to each wire.

John
 
Top