Identifying Gen 2 Ford Raptor Equipment Groups

[nmp1]

Since this keeps coming up and will continue to with used Raptors, why not make it easy for everyone.

 

[txgunsntrucks]

It is easy.

800=no heated or cooled seats
801 heated seats only
802 heated and cooled seats

 

[RaptorRnr]

Great video. When I was searching in 2020, I found a few key differences between the 2019 package options and the 2020. I kept the spreadsheet of the different SCREWs I was considering. Key to that was the 2019s had the separate Raptor Technology Package, which included Adaptive Cruise Control, Stop and Go Engine shutoff and the Pre Collision warning. It was a $1695 option. The 2020s rolled all of this in to the 802a package. In 2019 the 802a package was $9365. For 2020, with the Technology Package part of it, the cost was $10,920. It actually saved $140 on the MSRP options sheet over a 2019 with both included.

The Carbon Fiber package for both years was $995 and not part of the 802a package. Rear heated seats were $125. A factory spray-in bedliner was $595. The moonroof was a $1495 option and the "17" Forged Aluminum Wheels (beadlock upgrade) added $1895. Finally, the Tailgate step was an additional $375. Additional options included the engine block heater and the Recaro seats, which I didn't outline in my document.

What's nice is the 360 camera package was not part of that Technology package and is very useful, plus turns on when you're in Rock Crawl mode so that you can see any objects you need to navigate around while in the "cruise control for rock crawling without gas or break.

The order list for all F150s for 2019 is here:
https://media.ford.com/content/dam/fordmedia/North America/US/product/2019/f-150/2019-F-150-Order-Guide.pdf
For 2020 it's listed here:
https://media.ford.com/content/dam/fordmedia/North America/US/product/2020/f150/2020-F-150-OrderGuide.pdf

Because these may go away at some point I uploaded the PDFs.

 

[nmp1]

Great video. When I was searching in 2020, I found a few key differences between the 2019 package options and the 2020. I kept the spreadsheet of the different SCREWs I was considering. Key to that was the 2019s had the separate Raptor Technology Package, which included Adaptive Cruise Control, Stop and Go Engine shutoff and the Pre Collision warning. It was a $1695 option. The 2020s rolled all of this in to the 802a package. In 2019 the 802a package was $9365. For 2020, with the Technology Package part of it, the cost was $10,920. It actually saved $140 on the MSRP options sheet over a 2019 with both included.

The Carbon Fiber package for both years was $995 and not part of the 802a package. Rear heated seats were $125. A factory spray-in bedliner was $595. The moonroof was a $1495 option and the "17" Forged Aluminum Wheels (beadlock upgrade) added $1895. Finally, the Tailgate step was an additional $375. Additional options included the engine block heater and the Recaro seats, which I didn't outline in my document.

What's nice is the 360 camera package was not part of that Technology package and is very useful, plus turns on when you're in Rock Crawl mode so that you can see any objects you need to navigate around while in the "cruise control for rock crawling without gas or break.

The order list for all F150s for 2019 is here:
https://media.ford.com/content/dam/fordmedia/North America/US/product/2019/f-150/2019-F-150-Order-Guide.pdf
For 2020 it's listed here:
https://media.ford.com/content/dam/fordmedia/North America/US/product/2020/f150/2020-F-150-OrderGuide.pdf

Because these may go away at some point I uploaded the PDFs.

Yeah I did a video the day the 2020 info was made public and everybody was convinced a v8 was coming. I couldn’t believe 802 was basically 11k. The truck is great with lots of useful stuff but it was expensive and only going up from here. As long as they hold their values very well I’ll be happy.