How to: Running 37x14.50"s on your SVT Raptor...?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BlackReef

Active Member
Joined
Aug 1, 2011
Posts
79
Reaction score
30
What mods are necessary to run 37x14.50 (or 37x15.50) on an SVT Raptor, and have no rubbing on full bump or lock? Is it possible to do with stock fenders?

Thanks
 

Fred

FRF Supporting Member
Supporting Member
Joined
Sep 3, 2011
Posts
7,432
Reaction score
2,157
Location
Richmond, VA
Short answer no to stock fenders and 37 x14.50/15.50...what wheels and offset?
 

pat'sRAPTOR

FRF Addict
Joined
Jul 17, 2011
Posts
5,590
Reaction score
2,068
Location
Everywhere
Wow 14.5 and 15.5 that's wide! Or is that true width cause the toyo MT's are 37x13.5 and there is trim in to do to get the to fit. I ran 37 Toyos for a long time and had to trim A bit off the inner wheel well. I'm running method standards with a 0 offset

---------- Post added at 03:42 PM ---------- Previous post was at 03:40 PM ----------

To answer your question the easiest way to do 37's is to get fiberglass fenders it makes firing 37's a lot easier. The only way I did 37's without glass fenders is because I trimmed a bit and was on top perch but that's not recommended for any raptor besides the 2010 models cause the front torsion diff!
 

pat'sRAPTOR

FRF Addict
Joined
Jul 17, 2011
Posts
5,590
Reaction score
2,068
Location
Everywhere
Yea short answer is no. Hahaha if you wanna run 37's get glass fenders and a 0 offset wheel and you'll be good as long as its not some crazy width like 15.5 try and keep it under 14
 
Top