How To: Install of M&R Flush Mount Slicks

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

AbnMP13

Full Access Member
Joined
Nov 9, 2014
Posts
885
Reaction score
469
Location
Mississippi
Followed this thread and did mine today, worked great. Thanks for a great write up.

Used a cordless variable speed jigsaw and cut the inside of the lines, had to file/dremel a bit but better too small than too big.
 

marshallpulham

Full Access Member
Joined
Apr 26, 2014
Posts
38
Reaction score
1
doing mine tonight what a PAIN IN THE A$$ wow... i cut on the line but i think the template was slightly too small or the lights are bigger now.. had to recut another 1/4" thanks for the write up though.
 

lka

Full Access Member
Joined
Nov 22, 2014
Posts
600
Reaction score
265
Location
Left Coast
@Harblar nice write up, quick question,, I didn't see any mention of a relay from the trailer hitch harness to the lights, did you run one? I'm curious if you didn't does the uplifted turn the factory reverse lights on too? Since there's a direct connection now?
 

Crash33

Full Access Member
Joined
Sep 13, 2014
Posts
263
Reaction score
144
Ordered and now waiting for similar lights from Olympus. Thought it might be a good idea to cut from behind the bumper with my cutoff wheel. Then any slips or mishaps will be on back.
 

Forum statistics

Threads
92,817
Posts
1,946,182
Members
56,075
Latest member
Arizona Free
Top