GEN 2 High Flow Turbo Exhaust Adapter

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Troutrad

Full Access Member
Joined
Jan 24, 2020
Posts
587
Reaction score
592
Location
Kalispell, MT
Am considering a High Flow Turbo Exhaust Adapter for my 19. Surprised I don’t see all that much talk on here about it. SPD makes one, claims 24hp/43tq on a stock set up. Mountain Top tuning claims 20hp/25tq on stock. AMS Performance is cheapest and claims increase 55% internal cross sectional diameter which, if I did my math correctly, is better than the SPD or the Mountain Top. They don’t list gains. The outlet ID is 58-59mm for both the SPD and Mountain Top while the AMS has a minimum ID of 64mm.

Sounds like, for the price of these items, the potential gains are pretty good; even if 1/2 of what they claim, I’d probably still think it’s worth it.

I’m a “one wrencher” maybe 1 1/2 on a good day...haha. This looks like something for someone with a skill set better than I have.

Who would you have install this? Muffler/Exhaust shop? Dealership?

Thanks! And anyone with any experience or opinions on these, love to hear from you.

https://www.apollo-optics.com/colle...exhaust-adapter-adpt35r?variant=6812570845214

https://www.cjponyparts.com/mountai...0-2011-2019-f-150-raptor-2017-2019/p/TEAKIT1/

https://amsperformance.com/cart/ams-3-5l-ecoboost-f150-raptor-turbine-housing-adaptor-kit/
 
Last edited:

RAG13

Full Access Member
Joined
Mar 4, 2015
Posts
128
Reaction score
81
I have these on my '19. It was the first mod I did before the Cobb Stage 1 and then TCM tune. I did notice an increase, even though it was slight, in performance when these were added. Truck seemed to have better throttle response in the low to mid RPM range. I dont have any dyno results and my assessment is not scientific, but from what I could "feel" it was worth it for sure.
 

SRPRACING

Active Member
Joined
May 5, 2019
Posts
90
Reaction score
35
Location
SoCal
They are not a bad upgrade but they’re on the same lines of doing a CAI. These trucks are load based tuned. So on stock tune you’ll still make the same power with maybe a bit more throttle response.
 
Last edited:

magaraptor

Active Member
Joined
Jun 28, 2018
Posts
89
Reaction score
24
Location
beckley,wv
I wouldn’t waste the time or money On these. Just get the freak o boost Turbos from gearhead they go in stock location their Upgradedstock turbos Borgwarner If you want to feel a real difference
 

RAG13

Full Access Member
Joined
Mar 4, 2015
Posts
128
Reaction score
81
I wouldn’t waste the time or money On these. Just get the freak o boost Turbos from gearhead they go in stock location their Upgradedstock turbos Borgwarner If you want to feel a real difference
I dont see these turbochargers available for the '19's on their site.
 
OP
OP
Troutrad

Troutrad

Full Access Member
Joined
Jan 24, 2020
Posts
587
Reaction score
592
Location
Kalispell, MT
I dont see these turbochargers available for the '19's on their site.
https://www.ghtuning.com/product/gearhead-exclusive-2017-2019-raptor-3-5l-ecoboost-turbos/

Isn’t this it? Yeah, I was thinking maybe a $150...not $4200, haha. I little to rich for me and I definitely don’t have the skill set to put those puppies in.

I know everyone seems to exaggerate power and torque gains (particularly the CAI’s), but it seems there’s better evidence and Dyno proven that these work and, for the cost, seems a reasonable risk. Just don’t know how much it’ll cost me to have someone put them in. Any guesses?
 

RAG13

Full Access Member
Joined
Mar 4, 2015
Posts
128
Reaction score
81
https://www.ghtuning.com/product/gearhead-exclusive-2017-2019-raptor-3-5l-ecoboost-turbos/

Isn’t this it? Yeah, I was thinking maybe a $150...not $4200, haha. I little to rich for me and I definitely don’t have the skill set to put those puppies in.

I know everyone seems to exaggerate power and torque gains (particularly the CAI’s), but it seems there’s better evidence and Dyno proven that these work and, for the cost, seems a reasonable risk. Just don’t know how much it’ll cost me to have someone put them in. Any guesses?
Yes those are them for the '19's. Either my searching skills are shot or I'm just too tired. Thanks. I agree that they are expensive, but we all have to pay to play I guess. Right now with my setup the way it is, I think I'm pushing more HP and torque than I can handle on the street in an almost 6000 lb. truck. I'll concentrate more on the cosmetic and functional end now.
 

magaraptor

Active Member
Joined
Jun 28, 2018
Posts
89
Reaction score
24
Location
beckley,wv
I can sell you the module from hyper fast cars for 750 I paid 1500 for it it’ll give you the most out of what you got
 
Top