Help wiring spot light switch.

[H20guy310]

Ok, here is what I have. I want to use the stock spot light switch to power a pair of BD rock lights that will sit under my race mirrors. I know I can’t wire them directly because that will throw a code and kill the switch so it will not turn on. My question is this. Can I wire the switch directly to the battery so I can bypass the CBM? I know what each pin does and I also know if I can get power to the switch and bypass the CBM in theory everything should work.
I have a picture of pin assignment, my plan is to de-pin # 1 & 6 and run them directly to the battery. Doing this will bypass the CBM and should make the switch work like stock. Any ideas on why this should/ shouldn’t work will be appreciated. Thank you.

 

[The Car Stereo Company]

what spotlight? the front bumper lights?

 

[H20guy310]

It’s the OEM spot light in the rear view mirrors.

 

[The Car Stereo Company]

if it were me, i would use an lvt. then use it to power a relay to power the lights

 

[H20guy310]

Thank you.