Gen3 Raptor Triple Fog Light Kits from KR Off-Road are here! (Baja Designs & Morimoto 4Banger Kits)

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,386
Reaction score
1,074
So many may have noticed we've been a bit quit lately while the Gen3 Raptors were starting to hit the market. Main reason for that is, the Bronco was just released before the Gen3 Raptor. So we've been busy building up our Bronco demo truck and designing some awesome products for that (light mounts of course but other accessories like license plate brackets and ARB compressor mounts).

However, we didn't forget about the Raptor. Based on the design of our KR Off-Road Gen2 Raptor brackets, the new Gen3 fog kits are available for pre-order (roughly 4-6 weeks, mainly due to inventory and we're honestly producing a lot of Bronco products right now, so production is focusing on that).

KR Off-Road brackets are 100% American made. Made locally here on Long Island out of 11 gauge stainless steel. Not only are they made of stainless steel but we also powder coat them a matte black finish (we call it our belt + suspenders approach). Because our products are such high quality, we include our "Raptor Guarantee" to them. That provides you with a lifetime warranty, even if you flip your truck your brackets are covered!

This is a 100% bolt on installation which allows your lights to sit in the bumper opening properly. The system allows the lights to sit just behind the bumper, which is where you want them. Nice and tucked in there out of the way. Of course, in true KR Off-Road fashion, we do give you some adjustability of course. If you want the lights to sit more forward, not a problem. We have 3 horizontal channels where you can mount the lights. This allows you to bring them forward if you want, or slide them left/right. The entire bracket assembly also moves up and down vertically so you can center the lights in the opening.

We'll be adding the various packages to our site but so far we've added the Baja Designs & Morimoto 4Banger fog kits, since that is by far the most popular and best quality.

We wish we could offer these at a lower price like our Gen2 kits but sheet metal prices have gone up big time and these brackets are bigger then the Gen2 (which is odd, you'd think smaller because the opening is slightly smaller right?)

The kits are available for pre-order here (and of course use coupon code FOGS and save 5% off the kit right now):

Baja Designs
https://www.4x4truckleds.com/2021-ford-raptor-triple-fog-light-kit-w-baja-designs-lights/

Each kit includes:
  • 1 Pair of KR Off-Road Triple Fog Light Brackets
  • 3 Pairs of Baja Designs Lights
  • All-In-One Wiring Harness to connect to your OEM upfitter switches (each pair of lights will have independent control via your OEM upfitter switches)
  • Instructions
  • Our "Raptor Lifetime Guarantee". For as long as you own your Raptor, if you manage to break/bend/destroy these brackets we'll replace them free of charge (not including return shipping)
You must be registered for see images attach


Morimoto 4Banger
https://www.4x4truckleds.com/2021-ford-raptor-dual-fog-light-kit-w-morimoto-4banger-lights/

Each kit includes:
  • 1 Pair of KR Off-Road Triple Fog Light Brackets
  • 2 Pairs of Morimoto 4Banger Lights
  • All-In-One Wiring Harness to connect to your OEM upfitter switches (each pair of lights will have independent control via your OEM upfitter switches)
  • Instructions
  • Our "Raptor Lifetime Guarantee". For as long as you own your Raptor, if you manage to break/bend/destroy these brackets we'll replace them free of charge (not including return shipping)

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach

(Yes we're giving you a 3rd wire, in case you want to squeeze another 4Banger in there possibly, but we've only tested this with 2 4Banger pods)

You must be registered for see images attach
 
Last edited:

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,386
Reaction score
1,074
We just dialed in our brackets and we're still taking pre-orders. These are expected to be back from the laser cutter/painter around January 24th (maybe a week earlier). Here are some more photos of them installed on this Gen3 Raptor.

Not only do we give you a lot of mounting channels for a variety of lights, we also left you "windows" on the bracket so that you can get your wrench in there to tighten things down. The hardest part of installing a fog light kit is just AIMING the lights and getting things lined up properly. We made it as easy as we could. So you'll be able to make adjustments.

Another great feature you'll notice is how the lights sit properly in the bumper. They don't protrude from the front or hit the front bumper. They sit nice and proper inside the opening. You can mount up to 3 pairs of lights with NO BLOCKAGE (which was important for us). These photos show the lights aimed forward (which is where you want them) from straight on. You can see how nothing is blocked.

Get your pre-order in now and use coupon code FOGS to save 5% on your order:

https://www.4x4truckleds.com/2021-ford-raptor-triple-fog-light-kit-w-baja-designs-lights/

The lights can actually slide even more to the left/right (it started to rain on me so I called it a day with how these are oriented).

You must be registered for see images attach


You must be registered for see images attach
 

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,386
Reaction score
1,074
Very nice but I wish there was a filler to take care of the see through look

Problem with that is you lose a lot of adjustability. You're locked into a particular spot and they don't tend to work well across all the light brands. We make one for the Broncos and it restricts you to certain size lights (for example, 1x 3" and 2x 2" on the Bronco).

We thought about making one for the gen3 Raptor, but again, we don't want to lock people into not being able to adjust the lights up/down/left/right. That and it's not as easy an installation when you throw in a bezel because you block access to the bolts/etc...

It's really easy to install our kit because we know what people want when they install it. I sat there, installed the kit and said "it would be easier if I had this" and I made a change in the bracket design. It's why you see there are these window cut-outs on the bracket, aids during installation when you are inserting wrenches/etc...

If we did a shroud/bezel, you lose all that "easy" of installation as well as adjustments.
 

aileron

Active Member
Joined
Feb 22, 2021
Posts
74
Reaction score
157
Location
Norcal
I put my pre-order in back in November! Looking forward to getting this delivered. (You might consider sending out a status update email to all your pre-order customers, I was starting to wonder what the ETA was).

Just curious, do you have instructions for what is required to remove the factory fogs? I haven't looked at the wiring or how they're mounted. Can I reuse the first upfitter switch?
 

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,386
Reaction score
1,074
Yes we'll be providing instructions. We finished test fitting this weekend and we placed the order with our laser cutter for the brackets. They'll here end of next week possibly then we need a week for powder coating.
 

Littlefx4

Full Access Member
Joined
Feb 11, 2017
Posts
636
Reaction score
587
Location
Texas
I put my pre-order in back in November! Looking forward to getting this delivered. (You might consider sending out a status update email to all your pre-order customers, I was starting to wonder what the ETA was).

Just curious, do you have instructions for what is required to remove the factory fogs? I haven't looked at the wiring or how they're mounted. Can I reuse the first upfitter switch?
Yes, you can reuse the 1st upfitter. Simply unbolt the factory fogs, disconnect them from the harness. Note: fog wire and upfitter 1 switch wire run on the same harness. The harness is located behind the fogs themselves. The only problem you may encounter is the difference in connectors between your lights & the factory harness. There’s a vendor here that sells a relocation harness that’ll move both wires up to the battery giving you seven usable wires vs 5! Food for thought.
 

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,386
Reaction score
1,074
Yes, you can reuse the 1st upfitter. Simply unbolt the factory fogs, disconnect them from the harness. Note: fog wire and upfitter 1 switch wire run on the same harness. The harness is located behind the fogs themselves. The only problem you may encounter is the difference in connectors between your lights & the factory harness. There’s a vendor here that sells a relocation harness that’ll move both wires up to the battery giving you seven usable wires vs 5! Food for thought.

You mean us… as the vendor… we are providing our harness in the kit so you can plug the factory fog light connection into the lights chosen in our package so it’s a plug and play installation - it’s not extra it’s part of our kit
 

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,386
Reaction score
1,074
Did you know we include (at no additional cost) pigtails so that you can re-use your factory fog light/upfitter connection with our Triple Fog Light Kits?

https://www.4x4truckleds.com/vehicle-specific/ford/ford-f-150/2021-f-150-raptor/fog-lights/

This allows you to replace your factory fog lights with a MUCH better Triple Fog Light Kit (or Dual Fog Light Kit). One pair of lights will be controlled from your factory Fog Light button and the 2nd/3rd pairs will be controlled from your upfitter. We include 2 pairs of these pigtails (1 pair is used for the factory fog light connection and the 2nd pair is used for the upfitter that Ford has down in the fog light opening). Your 3rd pair uses the upfitter next to your battery.

We try and make this AS EASY AS POSSIBLE for you to get up and running. Each kit includes our 100% USA Made Stainless Steel (and powder coated) brackets. We're taking pre-orders now (our brackets are back from production next week, and then they need 1 week out at powder coating).

You must be registered for see images attach
 

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,386
Reaction score
1,074
The brackets will be done being laser cut Monday, then it's off to paint (needs 1 week at paint for powder coating). So all those pre-orders will start shipping out around January 24th.
 
Top