Gen 3 Raptor 37 Geiser Rear coils install + pics

j-man

Member
Joined
Aug 15, 2022
Posts
19
Reaction score
62
Location
los angeles
All right, im sooo pleased with Geiser’s upgraded rear coils for the 3rd gen Raptor. Gave a couple inches over stock height.
To start, i put these on my 22 Raptor 37 with a standard shell installed. With just the shell on, the rear was about 1/2” or so below the front height, & when i put anything more than a suitcase in the bed it was already sagging - no bueno.
I purchased the Geiser’s last week, were at my house in a few days, & just put em on. Final measurements for all of you looking to put them on ur 3rd gen are:
Front Stock height: 41 3/4”
Rear height w/ Geisers: 44 1/4”
Height of bottom of Hitch above ground: 21 3/4”.

Overall extremely happy w/ the outcome, im sure they’ll settle a half inch or so, but thats fine. Its a tad stiffer than stock, but i dont like that mushy slushy saggy feel anyway lol. Heres some pics, enjoy!
 

Attachments

  • AF48E9E9-8306-4DC0-8019-D66389F5BE08.jpeg
    AF48E9E9-8306-4DC0-8019-D66389F5BE08.jpeg
    168.2 KB · Views: 178
  • EF281FF0-5A15-4037-A29D-3D37BB7867DD.jpeg
    EF281FF0-5A15-4037-A29D-3D37BB7867DD.jpeg
    192.4 KB · Views: 194
  • 30344B4B-C2D0-4143-97B2-FED0263BFDB5.jpeg
    30344B4B-C2D0-4143-97B2-FED0263BFDB5.jpeg
    244.7 KB · Views: 205
  • AA224F70-3CDF-43CE-8A45-9675E5DCFBDD.jpeg
    AA224F70-3CDF-43CE-8A45-9675E5DCFBDD.jpeg
    356.5 KB · Views: 208
  • 4B368F33-7417-4289-9FCF-03A6E9B8319D.jpeg
    4B368F33-7417-4289-9FCF-03A6E9B8319D.jpeg
    255.5 KB · Views: 187
OP
OP
J

j-man

Member
Joined
Aug 15, 2022
Posts
19
Reaction score
62
Location
los angeles
heres more pics:
 

Attachments

  • 4DCCFABD-5F0C-4DE5-BDE9-3B1CD15FD564.jpeg
    4DCCFABD-5F0C-4DE5-BDE9-3B1CD15FD564.jpeg
    356.5 KB · Views: 159
  • 481495FD-0E2B-4A10-81D2-471B50B04BF5.jpeg
    481495FD-0E2B-4A10-81D2-471B50B04BF5.jpeg
    193.1 KB · Views: 133
  • 7C5C9448-AFDC-4DF7-994A-7116E89BB20C.jpeg
    7C5C9448-AFDC-4DF7-994A-7116E89BB20C.jpeg
    147.1 KB · Views: 260
  • F213125C-C8BA-472C-B222-1B28773F1348.jpeg
    F213125C-C8BA-472C-B222-1B28773F1348.jpeg
    244.9 KB · Views: 286
  • DC9AC3C8-BFE2-43B8-9F9B-0F54E8F2BD3D.jpeg
    DC9AC3C8-BFE2-43B8-9F9B-0F54E8F2BD3D.jpeg
    215.4 KB · Views: 280

DMays

FRF Supporting Member
Supporting Member
Joined
Dec 6, 2020
Posts
319
Reaction score
455
Location
Tennessee
Glad to know these fit. Their website says they won’t fit a 37pp
 

relak

Full Access Member
Joined
May 12, 2022
Posts
211
Reaction score
268
Location
Northeast
Great info. Might go this route when I start looking at tent setups.

Can you do me a favor and put some wheel well liners in the rear though? It’s said that the cause of global warming is actually the sun shining off liner-less GEN3 wheel wells.
 

Idaho Savage

FRF Supporting Member
Supporting Member
Joined
Jan 26, 2022
Posts
100
Reaction score
174
Location
USA
Do you carry anything else in the bed on the reg? Have you towed with them yet?
 

2020FordRaptor

Full Access Member
Joined
Jun 4, 2022
Posts
828
Reaction score
772
Location
Nevada
All right, im sooo pleased with Geiser’s upgraded rear coils for the 3rd gen Raptor. Gave a couple inches over stock height.
To start, i put these on my 22 Raptor 37 with a standard shell installed. With just the shell on, the rear was about 1/2” or so below the front height, & when i put anything more than a suitcase in the bed it was already sagging - no bueno.
I purchased the Geiser’s last week, were at my house in a few days, & just put em on. Final measurements for all of you looking to put them on ur 3rd gen are:
Front Stock height: 41 3/4”
Rear height w/ Geisers: 44 1/4”
Height of bottom of Hitch above ground: 21 3/4”.

Overall extremely happy w/ the outcome, im sure they’ll settle a half inch or so, but thats fine. Its a tad stiffer than stock, but i dont like that mushy slushy saggy feel anyway lol. Heres some pics, enjoy!
That turned out great!
 
Top