GEN 3 Official Aftermarket Wheels Thread

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jake226

FRF Supporting Member
Supporting Member
Joined
Sep 13, 2019
Posts
285
Reaction score
341
Location
IN
So I have venomrex vr602’s (17’s, +12) from my Gen 2. When I bought them in 2020 I was tempted to go fuel rebels and then found the VR602 more to my liking. Now I’m torn between throwing on some 37’s onto my current 602’s…or going for the new Fuel D785 in bronze ….or Convert in bronze. They both look wildly different than any other wheel I’ve been into before. I’m fairly confident the +1 offset would work in either of those…but I’m not sure about the -12 without trimming…. Ideally I’d like to have the option of going without the perch collar. I do plan on adding rpg collars myself in the spring if I don’t find someone I trust to install this winter.

Thoughts?
 

Attachments

  • 838F0326-8A71-4FB2-BF2B-DA0B61B3B76C.png
    838F0326-8A71-4FB2-BF2B-DA0B61B3B76C.png
    541.8 KB · Views: 116
  • 756A2592-FE99-44B1-8624-CE88665F6707.png
    756A2592-FE99-44B1-8624-CE88665F6707.png
    575.2 KB · Views: 116

brad25

Active Member
Joined
Dec 22, 2011
Posts
72
Reaction score
39
Location
Oregon City Oregon
I am replacing the stock wheels and tires as soon as I pick up my truck this month (i hope).

I want to go with the Mickey Thompson Baja Boss AT in a 35x12.50x17 (lower load rating versus the 315x70x17, D vs. E) with these wheels.

They are a 0 offsett. Will I have any rubbing issues?

Thanks!
1641361270590.png
 
Top