Discussion in 'Ford Raptor Build-Up Forum' started by Clockton, Oct 14, 2017.
What Gen 2 modifications would you make and in what order?
To do what, exactly and with what budget?
Wheels, tires, lighting, and onboard compressor system. That is all you really need to be safe off-road.
The next trip will be to part of the Mojave Road, Barstow, Pismo Beach. I will then load up the family and head over to Moab, Monument Valley, Bryce Canyon, etc this spring. There will be family camping involved on some of the trips.
Here is what one of the vendors recommended.
1. Coil Spring Collar
2. Deaver Springs
3. Bump System
5. Bed Rack
Budget is around $10K.
Thank you for the input and help.
Here's where I'm at: http://www.fordraptorforum.com/f65/raptizzles-gen-2-build-thread-57805/
My first 10K goes like this:
line-x bed + wheel wells
full race oil separator
full race intercooler
add pro front bumper
7xsquadrons for the bumper
2x xl80s for the pillars
2x squadron rear dust lights
4x s2s for reverse lights
37s and wheels
Its actually going to look like 13-ish
after that will come the bed cage, tie rods, rear bumper, lightbar on the roof, vhf, & lowrance.
Then i'll probably go full retard and go mid travel complete with dual shock setups, through the bed, etc , etc.
I plan on taking a brisk trip down baja some time next year.
Blow off valve
Red push to start button
Fake carbon exhaust tips
22s on ugly rims
2) mud flaps
4) pedal commander
5) 24x16s on 37s
6) fiberwerx +4s
7) rock lights
9) ADD honey badger bumpers and chase rack
10) big brake kit
11) KC roof lights
12) Fabtech 4" lift
13) bump stops for towing of course
14) lots of carbon fiber vinyl wherever you see fit
15) blow off valve
16) SPD adapters
17) straight pipes
18) cold air intake
If you're looking for a real answer my build thread is in my signature.
Separate names with a comma.