Gen 2 Cobb Intercooler on Gen 3

Dragos

Member
Joined
Jun 15, 2020
Posts
4
Reaction score
3
Location
Murfreesboro, TN
Storm surge from hurricane Ian fried the electrical system on my Gen 2 last week. Brought home a lightly used '22 yesterday and am curious if anyone has any information about whether a Cobb intercooler from a Gen 2 will fit a Gen 3? I know they don't have the Accessport software yet but thought about going ahead with the IC swap.
 

Nex

RIP CoronaRaptor
Joined
Sep 2, 2021
Posts
2,990
Reaction score
7,509
Location
Washington State
Welcome to FRF. I will wait for a Gen 3er to confirm but I believe the Gen 2 FMIC fits a Gen 3.

Please post pictures of said '22 or you will be assigned a prius picture.
 

2020FordRaptor

Full Access Member
Joined
Jun 4, 2022
Posts
826
Reaction score
770
Location
Nevada
Storm surge from hurricane Ian fried the electrical system on my Gen 2 last week. Brought home a lightly used '22 yesterday and am curious if anyone has any information about whether a Cobb intercooler from a Gen 2 will fit a Gen 3? I know they don't have the Accessport software yet but thought about going ahead with the IC swap.
Sorry that happened. I would assume they fit but I'd just wait for Cobb to release their gen 3 intercooler.
 
OP
OP
Dragos

Dragos

Member
Joined
Jun 15, 2020
Posts
4
Reaction score
3
Location
Murfreesboro, TN
Welcome to FRF. I will wait for a Gen 3er to confirm but I believe the Gen 2 FMIC fits a Gen 3.

Please post pictures of said '22 or you will be assigned a prius picture.
Thanks, and to satisfy your requirements for picture proof...
 

Attachments

  • Blue Dragon II.jpg
    Blue Dragon II.jpg
    84.6 KB · Views: 45

MrTorque

Full Access Member
Joined
Feb 12, 2021
Posts
123
Reaction score
73
Location
Texas
Yes the Cobb intercooler fits, I installed one on mine(check the intercooler install thread). It comes with two hoses/couplers one for gen 2 and one for gen 3.
 

Bluu

Active Member
Joined
Apr 21, 2022
Posts
53
Reaction score
80
Location
Bozeman, MT
Storm surge from hurricane Ian fried the electrical system on my Gen 2 last week. Brought home a lightly used '22 yesterday and am curious if anyone has any information about whether a Cobb intercooler from a Gen 2 will fit a Gen 3? I know they don't have the Accessport software yet but thought about going ahead with the IC swap.
I can confirm that it will fit. There is only one difference between the Gen 2 and Gen 3 and that is the coupler that goes from the BOV pipe to the factory pipe. If you buy your IC straight from Cobb, they include this additional piece (as was the case when i ordered). However, you will want to check with any other suppliers to make sure they have this updated coupler before ordering.
 

Attachments

  • PXL_20220820_011746780.jpg
    PXL_20220820_011746780.jpg
    152.1 KB · Views: 60
  • PXL_20220820_181447031.jpg
    PXL_20220820_181447031.jpg
    187.1 KB · Views: 60
OP
OP
Dragos

Dragos

Member
Joined
Jun 15, 2020
Posts
4
Reaction score
3
Location
Murfreesboro, TN
Nice. What else do you have planned besides a FMIC? And tune when it is available.
Not sure yet. That is all I had done to my '18. I've taken a huge hit to the wallet with the replacement even with insurance so it may be a while before I have the money to do anything.
 
OP
OP
Dragos

Dragos

Member
Joined
Jun 15, 2020
Posts
4
Reaction score
3
Location
Murfreesboro, TN
I can confirm that it will fit. There is only one difference between the Gen 2 and Gen 3 and that is the coupler that goes from the BOV pipe to the factory pipe. If you buy your IC straight from Cobb, they include this additional piece (as was the case when i ordered). However, you will want to check with any other suppliers to make sure they have this updated coupler before ordering.
Thanks to Bluu and MrTorque! I ordered through Goosetuned but I probably discarded the extra coupler. Will reach out to Winfield and see if I can get another.
 

MidLifeRaptor

Member
Joined
Feb 22, 2021
Posts
13
Reaction score
15
Location
USA
Anyone have experiences with taking a vehicle in for warranty work with an upgraded intercooler? I know all about the MM act regarding aftermarket parts etc, but looking for real world experience in the matter. I guess it would likely only matter in cases where issues occurred with turbos or anything indirectly connected?
 
Top