BigGriff023
Full Access Member
Looking to swap my airaid intake system for the SB Intake on my Gen 1. Curious if any vendors offer FRF discounts on these?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I have not. I will reach out to him tomorrow.Have you tried chris@freedonmotorsports
https://www.freedommotorsports.us/
Looking to swap my airaid intake system for the SB Intake on my Gen 1. Curious if any vendors offer FRF discounts on these?
No specific issues that I can think of. Im more looking to have a closed box intake to protect it from both the rain, (I get moisture and dirt in the bottom of the box after off roading or rain driving) and ambient engine temps. The afraid is an open system and is subject to the extremely hot temps in your engine bay which would go against the whole point of having a CAI. I have had S&B kits in my other vehicles and am amazed by the quality and detail that go into them. The top rubber seal has warn down around the edge of the frame of the afraid intake. I will make one very clear point and that is that I have had extremely great customer service from Airaid. I have called two separate times in the last two years about my filter media coming apart, and the tabs on the box frame breaking off. Both times they sent me replacements in two days with no questions asked.any issues with the air raid? Why the switch? I’m looking for an intake that will pair best with a supercharger in the future and JDM has the air raid in their kits. Thoughts?
any issues with the air raid? Why the switch? I’m looking for an intake that will pair best with a supercharger in the future and JDM has the air raid in their kits. Thoughts?
There's a good chance that whatever intake you choose will jot work for a supercharger setup. Whipple comes with a large intake tube that connects to the throttle body. The air filter flange is 6” diameter. Not sure about the Roush, but I imagine it will have one larger than an OEM replacement cold air intake.