FRF,
We just received our first rendered photos back for the F-150 Raptor Narwhal Toppers and wanted to share an early look as we kick off production for the platform. These renderings are made with the actual CAD specific to the F150.
We’ve also made several design updates based directly on feedback from the Raptor community and early customers.
3rd Brake Light Clearance:
Increased the cab-side cutout to accommodate aftermarket third brake lights and chase light setups. This allows you to run a topper when you need it without removing your lighting setups, and if you want to run no topper for Raptor runs, you can do so quickly!
Roofline Adjustment:
Final height will sit 1.5” above the cab. This gives additional interior volume and ensures proper clearance for rooftop tents and forward-mounted gear over the cab (including antenna clearance).
Refined Body Geometry:
Front corner lines have been tightened to align more cleanly with the cab’s C-pillar, resulting in a more integrated, OEM-level profile.
Target Weight:
We’re currently projecting ~110–120 lbs for the F-150 units with full carbon panels. The glass will add about 8 lbs per panel
Production + Timeline
First F-150 units targeting July deliveries
We’ll be offering complimentary customer installs in Colorado for early units
We’ll have our first physical prototypes on F-150s within the next month and will start sharing real-world photos, installs, and real-world testing shortly after.
We’re also planning to open the shop to the public in late May/early June for anyone local to CO (or willing to travel) to come check these out in person, ask questions, and give feedback directly.
We’ve built this product with input from the Raptor community, and your feedback is very valuable to us. If there’s something you want to see change or have questions about, call it out! We are stoked to bring this product to the Raptor community and finally offer a topper that's built with performance and utility in mind.
More to come!
Cheers,
Richie
Narwhal Truck Toppers



We just received our first rendered photos back for the F-150 Raptor Narwhal Toppers and wanted to share an early look as we kick off production for the platform. These renderings are made with the actual CAD specific to the F150.
We’ve also made several design updates based directly on feedback from the Raptor community and early customers.
3rd Brake Light Clearance:
Increased the cab-side cutout to accommodate aftermarket third brake lights and chase light setups. This allows you to run a topper when you need it without removing your lighting setups, and if you want to run no topper for Raptor runs, you can do so quickly!
Roofline Adjustment:
Final height will sit 1.5” above the cab. This gives additional interior volume and ensures proper clearance for rooftop tents and forward-mounted gear over the cab (including antenna clearance).
Refined Body Geometry:
Front corner lines have been tightened to align more cleanly with the cab’s C-pillar, resulting in a more integrated, OEM-level profile.
Target Weight:
We’re currently projecting ~110–120 lbs for the F-150 units with full carbon panels. The glass will add about 8 lbs per panel
Production + Timeline
First F-150 units targeting July deliveries
We’ll be offering complimentary customer installs in Colorado for early units
We’ll have our first physical prototypes on F-150s within the next month and will start sharing real-world photos, installs, and real-world testing shortly after.
We’re also planning to open the shop to the public in late May/early June for anyone local to CO (or willing to travel) to come check these out in person, ask questions, and give feedback directly.
We’ve built this product with input from the Raptor community, and your feedback is very valuable to us. If there’s something you want to see change or have questions about, call it out! We are stoked to bring this product to the Raptor community and finally offer a topper that's built with performance and utility in mind.
More to come!
Cheers,
Richie
Narwhal Truck Toppers


