Deaver +3 and stock front springs?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
roush_14

roush_14

Full Access Member
Joined
Nov 14, 2021
Posts
145
Reaction score
216
Location
Rhode Island
Thanks, I will try to sell them,plus the winch and bumper when I have enough posts here. I don't thing the used raptor parts demand in my area is to good,small state that it is.
 
OP
OP
roush_14

roush_14

Full Access Member
Joined
Nov 14, 2021
Posts
145
Reaction score
216
Location
Rhode Island
I installed the springs tonight. The springs in there were eibachs, could not see the print when they were installed. It dropped the front about 2 inches. Ride home was much better , a little softer, but he best part was no bump steer/jittery steering wheel over bumps. probably going to install drop shackles in the rear to level it a bit and call it a day.
 
OP
OP
roush_14

roush_14

Full Access Member
Joined
Nov 14, 2021
Posts
145
Reaction score
216
Location
Rhode Island
I had no idea what springs were in there, I assume previous owner put them in to compensate for the front heavy winch and aftermarket bumper setup which is now off the truck.
 
Top