Forums
New posts
Search forums
What's new
New posts
New profile posts
Latest activity
Members
Registered members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
RAM TRX - TRX-Forum.com
Bronco Raptor - BroncoRaptorForum.com
Forums
GEN 2 (2017-2020) Ford F-150 Raptor Forums
Ford F-150 Raptor General Discussions [GEN 2]
@CRISTHEILLEST GEN 2 BUILD THREAD
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="cristheillest" data-source="post: 1847325" data-attributes="member: 61146"><p>In order to pass the wires from the cab into the engine bay, I drilled a 1/4" hole directly on the harness grommet and passed my wires through. It's kind of a pain in the ass so what I did, I grabbed my antenna and taped my wires to the tip and passed them into the cab from the engine bay. This make things much much easier. </p><p>[ATTACH=full]380564[/ATTACH]</p><p>Once your wires are passed through the grommet into the engine bay, to keep things clean and not too visible, this is what I did. Ran the wires up above the brake booster as shown below. </p><p>[ATTACH=full]380565[/ATTACH]</p><p>Once above the brake booster, I ran the wires behind the insulation blanket hugging the fire wall. You'll see 2 aluminum clips holding the blanket tight, simply slide those off about 1/2" and now you can bring your wiring tight against the firewall and away from the moving parts. </p><p></p><p>Kinda hard to see in the picture below, but I guess that's the point right? (It's the red cable, trace it back on the picture) Once that's done simply connect your ground and your power to the battery positive terminal.</p><p>[ATTACH=full]380566[/ATTACH]</p><p></p><p>That's what I did, pretty straight forward but I got a couple questions on IG so I figured why not post about this too. </p><p></p><p>Note: Keep in mind you'll more than likely have to extent your wires for the radio, I used the same 12g 2-in-1 wire to extend my wires all the way to the battery. </p><p>[ATTACH=full]380568[/ATTACH]</p><p></p><p>All this is very straight forward and genetic, if you guys have any questions send me a DM and I'll be happy to help.</p></blockquote><p></p>
[QUOTE="cristheillest, post: 1847325, member: 61146"] In order to pass the wires from the cab into the engine bay, I drilled a 1/4" hole directly on the harness grommet and passed my wires through. It's kind of a pain in the ass so what I did, I grabbed my antenna and taped my wires to the tip and passed them into the cab from the engine bay. This make things much much easier. [ATTACH type="full"]380564[/ATTACH] Once your wires are passed through the grommet into the engine bay, to keep things clean and not too visible, this is what I did. Ran the wires up above the brake booster as shown below. [ATTACH type="full"]380565[/ATTACH] Once above the brake booster, I ran the wires behind the insulation blanket hugging the fire wall. You'll see 2 aluminum clips holding the blanket tight, simply slide those off about 1/2" and now you can bring your wiring tight against the firewall and away from the moving parts. Kinda hard to see in the picture below, but I guess that's the point right? (It's the red cable, trace it back on the picture) Once that's done simply connect your ground and your power to the battery positive terminal. [ATTACH type="full"]380566[/ATTACH] That's what I did, pretty straight forward but I got a couple questions on IG so I figured why not post about this too. Note: Keep in mind you'll more than likely have to extent your wires for the radio, I used the same 12g 2-in-1 wire to extend my wires all the way to the battery. [ATTACH type="full"]380568[/ATTACH] All this is very straight forward and genetic, if you guys have any questions send me a DM and I'll be happy to help. [/QUOTE]
Insert quotes…
Verification
Post reply
Members online
970rap
Trail_Rider
Barr993
E-Bom
RaptorR81
CRP
twoputtbirdie
spkoli
NickyF25
pirates1456
ChevyLee
Rosorbetw
Wfo
Ballajb
CVP33
jAKe47
baskethead
Zeusmotorworks
drew5580
ChadH83
Evasive
DSRTSLYR
evoraptor
Forum statistics
Threads
92,829
Posts
1,946,522
Members
56,082
Latest member
JTRaptor20
Forums
GEN 2 (2017-2020) Ford F-150 Raptor Forums
Ford F-150 Raptor General Discussions [GEN 2]
@CRISTHEILLEST GEN 2 BUILD THREAD
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
Accept
Learn more…
Top