GEN 2 Cobb Intercooler Install Help

[TrackRat]

So just buttoning up my install and have two questions.

1. For anyone that has done this before and have cut their grill shudders... any good pics or videos you’d suggest I review before getting out the Dremel.

2. The pic below is of a connector that for the life of me I can’t find a home for. What am I forgetting? It’s attached to the wiring harness that runs down to the blow off valve.








Sent from my iPhone using Tapatalk Pro

 

[TrackRat]

Found the connection behind the bumper (driver side).


Sent from my iPhone using Tapatalk Pro

 

[Wfo]

I believe that went to the flappers on the oem unit, just zip tie it out of the way.

 

[Huttomitch]

That is the Adaptive cruise control module connector. That module lives behind the plastic cover on the driver side of the bumper like you found.

 

[Sheeepdog18]

YouTube has a very good video on how to cut the grill on a Cobb installation. I believe it was by off-road alliance.

 

[Raptus]

Do you have to remove the OEM shutters with the COBB IC?

 

[Huttomitch]

Do you have to remove the OEM shutters with the COBB IC?

Yes, you have to remove the main grille shutters to install the COBB IC.

 

[eco_beast_raptor]

This is what I had cut out, I cut in 3 locations with a sawzall. I couldn't find any good tutorials on how to do it back when I did it.

 

[Raptus]

Thanks for the information.

 

[OffroadAlliance.com]

Here's our installation video! We keep a ton of Cobb parts in stock if you need intercoolers, intakes, Accessports, etc.


Ph: 888-466-8991
Interwebs: OFFROADALLIANCE.COM